Sökning: "cryogenic"
Visar resultat 6 - 10 av 130 avhandlingar innehållade ordet cryogenic.
6. InP High Electron Mobility Transistor Design for Cryogenic Low Noise Amplifiers
Sammanfattning : The InGaAs/InAlAs/InP high electron mobility transistor (InP HEMT) is the superior technology for the most demanding low-noise and high-speed microwave and millimeter-wave applications, in particular in radio astronomy and deep-space communication. InP HEMT has enabled cryogenic low noise amplifier (LNA) designs with noise temperatures about ten times the quantum noise limit from sub GHz up to 120 GHz. LÄS MER
7. Ultra-Low Power InAs/AlSb HEMTs for Cryogenic Low-Noise Applications
Sammanfattning : The InAs/AlSb high electron mobility transistor (HEMT) is an emerging microwave device technology for ultra-low power and low noise applications. Due to the low bandgap (0. LÄS MER
8. InP High Electron Mobility Transistors for Cryogenic Low-Noise and Low-Power Amplifiers
Sammanfattning : The InAlAs/InGaAs/InP high-electron mobility transistor (InP HEMT) is the preferred low-noise device in cryogenic low-noise amplifiers (LNAs) operating at 5-15 K. Such LNAs are utilized in microwave and millimeter-wave detection in radio astronomy. LÄS MER
9. Design and Fabrication of InP High Electron Mobility Transistors for Cryogenic Low-Noise Amplifiers
Sammanfattning : High electron mobility transistor (InP HEMT) cryogenic low noise amplifiers (LNAs) have made significant improvements in noise and gain following decades of development. Applications are found from radio astronomy to quantum computing. LÄS MER
10. Cryogenic Machining of Ti-6Al-4V
Sammanfattning : The use of cryogenic coolants such as liquid nitrogen or liquid carbon dioxide has emerged as a sustainable alternative to conventional cutting fluids during machining operations, with the potential to increase tool life, leading to productivity gains, as well as to improve the surface integrity of the machined components. In addition, the machined surfaces are left residue-free after the process and there are no used cutting fluids to dispose of. LÄS MER