Sökning: "creep rate modelling"
Visar resultat 1 - 5 av 15 avhandlingar innehållade orden creep rate modelling.
1. Creep modelling of particle strengthened steels
Sammanfattning : Materials used in thermal power plants have to resist creep deformation for time periods up to 30 years. Material evaluation is typically based on creep testing with a maximum duration of a few years. This information is used as input when empirically deriving models for creep. LÄS MER
2. Creep modelling of particle strengthened steels
Sammanfattning : Materials to be used in thermal power plants have to resist creep deformation for time periods up to 30 years. The role of alloying elements for creep strength of 9-12% Cr steels is analysed. The creep strength in these steels relies on minor additions of alloying elements. LÄS MER
3. Simulation of welding and heat treatment : modelling and validation
Sammanfattning : Many aerospace components with complex geometry are fabricated from smaller parts using joining techniques such as welding. Welding and the heat treatment which usually follows, can result in unwanted deformation and stresses. LÄS MER
4. On modelling of slope stability in sensitive clay
Sammanfattning : The stability of natural slopes is a global problem, with the number of landslides and the associated socioeconomic losses increasing, as a result of the global trend of urbanisation, deforestation and changed weather patterns. The available methods for identifying potential failure modes and assessing the stability, however, overly simplify the modelled soil behaviour within a slope, which might lead to unnecessary mitigation measures or non-conservative results. LÄS MER
5. Constitutive Modelling and Finite Element Analysis of Concrete Structures with Regard to Environmental Influence
Sammanfattning : A constitutive model for concrete is formulated. Tensile fracture is described using a smeared crack approach where the fracrure energy is considered and the shear stiffneess in the cracked region is gradually reduced as crackling develops. LÄS MER