Sökning: "corrosion resistance"

Visar resultat 21 - 25 av 240 avhandlingar innehållade orden corrosion resistance.

1. 21. High Temperature Corrosion Behaviour of Ni-base Alloys and FeCrAl Alloys – The Influence of Water Vapour

   Författare :Tommy Sand; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cr-evaporation; FeCrAl alloy; Oxidation; Chromia scale; Alumina scale; High-temperature corrosion; Ni-base alloy;

   Sammanfattning : Electricity production, transportation, and manufacturing industry are some of the largest sources of greenhouse gas emissions. In many cases, these processes are carried out at high temperature and energy efficiency is limited by material degradation, so-called ‘high-temperature corrosion’. LÄS MER

3. 22. Material Solutions for Mitigating High Temperature Corrosion in Biomass- and Waste-fired Boilers - Utilizing Novel FeCrAl Alloys and HVAF-sprayed Ni-based Coatings

   Författare :Johan Eklund; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Waste; HVAF; High temperature corrosion; Biomass; FeCrAl alloys; Ni-based coatings; Silicon;

   Sammanfattning : Combustion of biomass and waste for heat and electricity production is a promising alternative to fossil fuels and is thereby an important step towards a more sustainable future. However, due to substantial amounts of alkali- and chlorine-containing species as well as moisture in biomass and waste, the combustion of these results in a highly corrosive environment which accelerates the degradation of steel components in the boiler, drastically increasing the maintenance costs. LÄS MER

4. 23. Corrosion resistant alumina-forming alloys for lead-cooled reactors

   Författare :Jesper Ejenstam; Inger Odnevall Wallinder; Il Soon Hwang; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Kemi; Chemistry;

   Sammanfattning : Generation IV nuclear power technologies provide attractive solutions to the common issues related to conventional nuclear power plants currently in operation worldwide. Through a significant reduction of the long-term radiotoxicity of nuclear waste, a more efficient use of nuclear fuel resources, and implementation of inherent safety features, Generation IV will make nuclear power sustainable and thus increase the public acceptance of nuclear power. LÄS MER

5. 24. Atmospheric corrosion of copper and copper-based alloys in architecture : from native surface oxides to fully developed patinas

   Författare :Tingru Chang; Inger Odnevall Wallinder; Tomas Prošek; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Chemical Engineering; Kemiteknik;

   Sammanfattning : Copper and copper-based alloys are commonly used in both ancient and modern architecture. This requires an in-depth fundamental and applied understanding on their atmospheric corrosion behavior at different climatic, environmental and pollutant levels and how these parameters influence e.g. LÄS MER

7. 25. Assessment of bio-based fuel ash effects on magnesia refractory materials in quicklime production kilns

   Författare :Naresh Kumar Wagri; Britt M. Andersson; Markus Carlborg; Markus Broström; Matias Eriksson; Bengt-Johan Skrifvars; Umeå universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Refractory corrosion; ash slag intrusion; lime kiln; MgO refractory; coal ash; olive pomace ash; biomass fuel; crushing strength; potassium K ; silicon Si .; Materials Science; materialvetenskap;

   Sammanfattning : Limestone is calcined into quicklime in lime kilns at temperatures above 1000°C. Heat is supplied through combustion inside the kilns, which are insulated with a lining of refractory bricks to mitigate heat loss and to protect the kiln from the hot, chemically aggressive, and mechanically abrasive environment. LÄS MER