Sökning: "control winding"

Visar resultat 1 - 5 av 27 avhandlingar innehållade orden control winding.

  1. 1. Voltage Transients in the Field Winding of Salient Pole Wound Synchronous Machines : Implications from fast switching power electronics

    Författare :Roberto Felicetti; Urban Lundin; Jon Kjellin; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; apparent resistance; cable modeling; current control; transmission line model; eddy currents; field winding; frequency analysis response; Fourier Transform; impedance mismatch; main inductance; overvoltage; parasitic capacitance; partial discharge; quality factor; ringing; slew rate; stray inductance; voltage gradient; winding resonance frequency;

    Sammanfattning : Wound Field Synchronous Generators provide more than 95% of the electricity need worldwide. Their primacy in electricity production is due to ease of voltage regulation, performed by simply adjusting the direct current intensity in their rotor winding. LÄS MER

  3. 2. Run-Up Transient Analysis for Salient Pole Wound Field Synchronous Motors : Field winding and power electronics implications for a smoother and cooler asynchronous start

    Författare :Roberto Felicetti; Urban Lundin; Andreas Binder; Uppsala universitet; []
    Nyckelord :apparent resistance; cable modeling; current control; transmission line model; eddy currents; field winding; frequency analysis response; Fourier Transform; impedance mismatch; main inductance; overvoltage; parasitic capacitance; partial discharge; quality factor; ringing; slew rate; stray inductance; voltage gradient; winding resonance frequency; asynchronous start; run-up; torque ripple; reluctance torque; Engineering Science with specialization in Science of Electricity; Teknisk fysik med inriktning mot elektricitetslära;

    Sammanfattning : Salient Pole Wound Field Synchronous Machines have better efficiency at full load than asynchronous machines of the same capability. Moreover, where asynchronous machines need inherently to draw a magnetizing current from the grid, Salient Pole Wound Field Synchronous Machines can work efficiently at unity power factor. LÄS MER

  4. 3. Faults detection and diagnosis for three phase induction machines

    Författare :Mohammed Obaid Mustafa; George Georgoulas; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Reglerteknik; Control Engineering;

    Sammanfattning : Three phase induction motors have been intensively utilized in industrial applications, mainly due to their efficiency and reliability. These motors have good properties such as: increased stability and robustness, durability, large power to weight ratio, low production costs and controllability easiness. LÄS MER

  5. 4. Partial Discharges in Large Rotating Machines - Continuous On-line Monitoring and Localisation, Based on a New Developed Technique (InTech)

    Författare :Abkar Kheirmand; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; InTech; detection; on-line monitoring; insulation; stator; condition control; PD measurement; Powerformer; winding; rotating machine; partial discharge;

    Sammanfattning : Partial discharges (PD) that originate from dielectrically defective parts of the insulation system result in its degradation, which may ultimately lead to a failure of high voltage apparatus. This has resulted in development of numerous PD measuring techniques. One of the most widespread applications of PD measurement is in rotating machines. LÄS MER

  7. 5. Control and Design Aspects of Components and Systems in High-Voltage Converters for Industrial Applications

    Författare :Per Ranstad; Hans-Peter Nee; Alfred Rufer; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High-voltage converter; resonant converter; high-voltage transformer; transformer parasitics; IGBT; soft-switching; control; Electric power engineering; Elkraftteknik;

    Sammanfattning : High-frequency dc-dc converters are widely used in power electronic applications, both in consumer products and industrial products. By operating the converter at higher frequencies both a smaller size and better control characteristics can be obtained. LÄS MER