Sökning: "chromium-alloyed steel."

Visar resultat 1 - 5 av 9 avhandlingar innehållade orden chromium-alloyed steel..

  1. 1. ROLE OF SURFACE OXIDES IN SINTERING OF CHROMIUM-ALLOYED STEEL POWDER

    Författare :Henrik Karlsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; water atomisation; surface analysis; sintering; chromium-alloyed steel.; Powder metallurgy; surface reactions; surface; surface oxide; SEM; XRD; AES; XPS;

    Sammanfattning : During water-atomisation and handling of steel powder the surface inevitably oxidises. The surface bound oxide is an important factor in the processing of powder metallurgical (PM) steels, especially in case the powder contains elements forming stable oxides, such as Cr, Mn, and Si. LÄS MER

  3. 2. Surface characterisation of water-atomised chromium-alloyed steel powder

    Författare :Henrik Karlsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : .... LÄS MER

  4. 3. Critical Aspects of Delubrication and Sintering of Chromium-alloyed Powder Metallurgy Steels

    Författare :Seshendra Karamchedu; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; delubrication; oxide reduction; surface oxide; carbon control; sintering atmosphere; chromium-alloyed sintered steels;

    Sammanfattning : The cost efficiency and performance of Powder Metallurgy (PM) steels can be improved by replacing conventionally used alloying elements such as copper and nickel with chromium. Utilizing chromium imposes a challenge in terms of processing due to its effect on powder compressibility and high oxygen affinity, the latter of which, to a certain extent, is dealt with by introducing chromium in prealloyed form that decreases its activity. LÄS MER

  5. 4. Critical Aspects of High Performance Manufacturing of Structural Sintered Steel

    Författare :Sepehr Hatami; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tool Steels; Modelling; Controlled Atmosphere; Wear Mechanisms; Sintering; Pressing Dies; Chromium Alloyed Steel;

    Sammanfattning : Steel is the dominant material for the production of structural parts. By means of powder metallurgy (PM) processing, manufacturers have been able to manufacture steel parts with appreciable dimensional accuracy and proper mechanical properties. LÄS MER

  7. 5. High Performance Manufacture of Sintered Steel – Critical Aspects of Tooling Performance and Sintered Microstructure

    Författare :Sepehr Hatami; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tool Steels; Chromium Alloyed Steel; Modelling; Process Selection; Sinter-Hardening; Atmosphere; Microstructure; Galling; Pressing Dies; Wear;

    Sammanfattning : Steel is the dominant material for the production of structural parts. By means of powder metallurgy (PM) processing, manufacturers have been able to manufacture steel parts with appreciable dimensional accuracy and desirable mechanical properties. LÄS MER