Sökning: "charge injection"

Visar resultat 1 - 5 av 137 avhandlingar innehållade orden charge injection.

  1. 1. Characterization of Different Interface Types for HVDC Extruded Cable Applications

    Författare :Espen Doedens; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polymer surfaces; cable peelings; HVDC; Roughness; Charge injection; XLPE; Field enhancement factors; Schottky injection; DC breakdown; Voltage decay; interfaces; Fowler-Nordheim injection; extruded cable; Roughness assisted charge injection.; Charge decay;

    Sammanfattning : In extruded HVDC cable systems a variety of interface types can be found, and the interfacial properties depend on the application within the system. Such applications can be joints, terminations or the cable itself and they will all have different material combinations and manufacturing methods. LÄS MER

  3. 2. Topographical Impact on Space Charge Injection, Accumulation and Breakdown in Polymeric HVDC Cable Interfaces

    Författare :Espen Doedens; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; interfaces; XLPE; roughness; cable peelings; polymer surfaces; space charge; field enhancement factor; PEA; DC breakdown; extruded cable; roughness enhanced charge injection; HVDC; charge injection;

    Sammanfattning : Extruded HVDC cable systems feature a variety of interface types, for which physio-chemical properties will depend on the type of application. Such applications can be joints, terminations or the cable itself, all introducing different material combinations and manufacturing methods. LÄS MER

  4. 3. Charge transport in polymer-based insulating materials for high voltage applications: effect of single- and multi-layered structures

    Författare :Tuan Anh Hoang; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; charge trapping and de-trapping; polyethylene; surface potential decay; enamel insulation; charge transport; charging current; charge injection; charge mobility; DC conductivity; nanocomposite;

    Sammanfattning : Polymer composites have been widely employed as electrical insulating materials for high voltage components and devices such as power cables, gas-insulated systems, rotating machines, line and post insulators, etc. Such materials are usually made by introducing inorganic oxides (SiO2, TiO2, Al2O3, MgO) into polymeric matrices e.g. LÄS MER

  5. 4. Emission and Deposit Formation in Direct Injection Stratified Charge SI Engines

    Författare :Håkan Sandquist; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; cycle-resolved measurements; deposit formation; direct injection; stratified charge; hydrocarbon emissions; SI engines; fuels;

    Sammanfattning : A promising approach to increase the efficiency of the spark ignition (SI) engine is to inject the fuel directly into the cylinder to form a stratified charge. There is a potential to reduce the fuel consumption at low speeds and loads by 20 - 25% compared with conventional SI engines with stoichiometric homogeneous charge. LÄS MER

  7. 5. Characterization of the Homogeneous Charge Compression Ignition Combustion Process

    Författare :Anders Hultqvist; Förbränningsmotorer; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; akustik; Motors and propulsion systems; Motorer; framdrivningssystem; Termisk teknik; termodynamik; Thermal engineering; applied thermodynamics; vakuumteknik; hydraulik; Maskinteknik; vibration and acoustic engineering; hydraulics; vacuum technology; ATAC; Mechanical engineering; MK; CAI; TS; MULDIC; PREDIC; HCCI; fuel tracer; combustion; injection; direct; port; engine; LDV; LIF; PLIF; vibrationer;

    Sammanfattning : The main objective of this project was to characterize the HCCI combustion process. Central parts in the project were the progress of the HCCI combustion process, the influence of charge homogeneity on the combustion process and sources of UHC and CO emissions in HCCI combustion. LÄS MER