Sökning: "casting simulation"
Visar resultat 1 - 5 av 44 avhandlingar innehållade orden casting simulation.
1. Metal Expansion Penetration During Solidification of Grey Cast Iron
Sammanfattning : The meta! expansion penetration has been examined experimentally. The whole casting process was simulated using a commercial software, in order to investigate the solidification characteristics and the pore formation in the casting studied. LÄS MER
2. The mechanisms of metal expansion penetration during solidification of grey cast iron
Sammanfattning : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. LÄS MER
3. Simulation of Microstructure-based Mechanical Behaviour of Cast Components
Sammanfattning : In the process of developing cast iron and cast aluminium components, a high level of co-operation between product development and production is of great importance. From an engineering standpoint, this co-operation is limited early in the product development phase by e.g. LÄS MER
4. Numerical simulation of continuous casting of steel with applied magnetic field
Sammanfattning : .... LÄS MER
5. A study of mold flux entrapment and gas entrainment in an ingot casting process
Sammanfattning : The focus of this work is to study the gas entrainment and mold flux entrapments during the ingot filling process based on physical and numerical modelling.The formation of the free surface was investigated in the uphill teeming method, which illustrates a dynamic change at a quasi-steady state. LÄS MER