Sökning: "cast steel"

Visar resultat 6 - 10 av 66 avhandlingar innehållade orden cast steel.

1. 6. Thermal Cycling, Creep- and Tensile Testing of Cast Exhaust Materials at Elevated Temperatures

   Författare :Christian Öberg; Stefan Jonsson; Henrik Östling; KTH; []
   Nyckelord :creep; constant-load; thermal cycling; tensile test; cast materials; cast iron; exhaust materials.; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : An exhaust manifold of a truck engine is subjected to tough conditions. As the truck is started, operated and shut down, it becomes subjected to thermal cycling up to around 800°C. At such high temperatures, corrosion, fatigue and creep are active degradation mechanisms. LÄS MER

3. 7. Creep Behavior of High Temperature Cast Materials for Exhaust Applications

   Författare :Christian Öberg; Stefan Jonsson; Baohua Zhu; John Hald; KTH; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Creep; creep behaviour; creep damage; ductile cast iron; high-alloyed austenitic cast steel; thermal cycling; tensile testing; stress relaxation; oxidation; precipitation.; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : This thesis focuses on creep of four cast materials intended for exhaust manifolds in heavy-duty truck engines. Two of the materials are ferritic ductile cast irons, SiMo51 and SiMo1000, one is an austenitic ductile cast iron, D5S, and another one is an austenitic cast steel, HK30. LÄS MER

4. 8. Laser welding of ultra-high strength steel and a cast magnesium alloy for light-weight design

   Författare :Karl Fahlström; Lars-Erik Svensson; Leif Karlsson; Michael Rethmeier; Högskolan Väst; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser welding; ultra-high strength steel; cast magnesium alloy; light-weight design; automotive industry; distortion; porosity; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

   Sammanfattning : There is a strong industrial need for developing robust and flexible manufacturing methods for future light-weight design. Better performing, environmental friendly vehicles will gain competitive strength from using light weight structures. LÄS MER

5. 9. On particles and slags in steel casting

   Författare :Dimitrios Siafakas; Anders E.W. Jarfors; Taishi Matsushita; Sridhar Seetharaman; Jönköping University; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hadfield steel; deoxidation; grain size; inoculation; particles; viscosity; slag;

   Sammanfattning : Hadfield steel is widely accepted as one of the most important steel alloys utilized in industrial applications where high impact strength and wear resistance is required. Like in most metallic alloys used for component casting, the mechanical properties of Hadfield steel are directly connected with the microstructure of the material. LÄS MER

7. 10. Oxidation, Creep and Fatigue Synergies in Cast Materials for Exhaust Manifolds

   Författare :Shengmei Xiang; Joakim Odqvist; Baohua Zhu; Stefan Jonsson; Johan Ahlström; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fatigue; low-cycle fatigue; fatigue in an inert atmosphere; fatigue in a synthetic diesel exhaust atmosphere; corrosion-fatigue; creep-fatigue; high-temperature corrosion; high-temperature fatigue; synergistic effect; corrosion-fatigue synergy; creep-fatigue synergy; high-temperature alloys; fatigue damage; creep-fatigue damage; corrosion-fatigue damage; ductile cast iron; high-alloyed austenitic cast steel; thermal cycling; precipitation; aging.; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : The future development of engines of heavy-duty vehicles towards reduced CO2 emission will increase the exhaust gas temperature and render the exhaust atmosphere more corrosive. The current service material of exhaust gas components - a ferritic ductile cast iron called SiMo51 - will soon meet its upper-temperature limit. LÄS MER