Sökning: "cast metals"
Visar resultat 1 - 5 av 22 avhandlingar innehållade orden cast metals.
1. Fatigue Assessment of Cast Components : Influence of Cast Defects
Sammanfattning : This thesis is on the fatigue assessment of cast components with special attention to defects. The primary material in view is nodular cast iron, but also cast steel is considered. However, the fatigue behaviour is in principle valid for general use on other cast metals. LÄS MER
2. On the Nucleation and Inoculation of Metals
Sammanfattning : Latent heat during recalesence and nucleation and post-recalesence temperature was analysed for refractory metals. An effect on latent heat was found by alloying the pure elements with other refractories. Latent heat was found to be 15-65% of tabulated values. Interface energy was evaluated from undercooling experiments. LÄS MER
3. On the Experimental Determination of Material Damping in Metals
Sammanfattning : .... LÄS MER
4. Al-Si Cast Alloys - Microstructure and Mechanical Properties at Ambient and Elevated Temperatures
Sammanfattning : Swedish industry is a global leader in development and manufacture of automotive and aviation components where the usage of aluminium products is remarkable. In addition to manufacturing aluminium components, casting enables low-cost and low-emission production of complex geometry components with a range of sizes. LÄS MER
5. Microstructural Evolution In As-cast Alloys during Plastic Deformation
Sammanfattning : The effect of deformation on microstructural changes in metals and alloys is the subject of considerable practical interest. The ultimate goal is to control, improve and optimize the microstructure and texture of the finished products produced by metal forming operations. LÄS MER