Sökning: "cast magnesium alloy"
Visar resultat 6 - 10 av 10 avhandlingar innehållade orden cast magnesium alloy.
6. Thermomechanical Processing of Nickel-Base Alloy 825
Sammanfattning : Alloy 825 material was studied using a Gleeble-3800 thermosimulatorby performing single-hot compression experiments.Optical microscopy and electron backscatter diffraction wereutilized to characterize the microstructure. Dynamicrecrystallization is not considerable in the as-cast alloy anddislocation recovery is deemed to be dominant. LÄS MER
7. Atmospheric corrosion of the MgAl alloy AM50 in rheocast and high pressure diecast conditions - Influence of Microstructure, CO2 and NaCl
Sammanfattning : The NaCl-induced atmospheric corrosion of the high pressure diecast (HPDC) MgAl alloy AM50 was investigated. Commercially pure (CP) Mg was used as the reference. Two levels of salt; i.e. LÄS MER
8. The Role of Microstructure in the Atmospheric Corrosion of Selected Light Alloys and Composites
Sammanfattning : Magnesium-aluminum (Mg-Al) alloys, Mg-based metal matrix composites (MMCs) and Al alloys are among the best material candidates for future lightweight solutions. However, the use of these materials is limited by a number of issues, including the ability to resist corrosion. LÄS MER
9. On the microstructure and mechanical properties of Mg-Al alloys
Sammanfattning : The microstructural features and the mechanical properties of binary Mg-Al alloys have been investigated by using a gradient solidification technique. Homogeneous and nearly defect-free samples were produced under well controlled cooling conditions, through which the microstructural characteristics as well as the relationships between microstructure and mechanical properties in Mg-AI alloys were precisely defined. LÄS MER
10. Semi-solid Al-7Si-Mg castings – Microstructure and mechanical properties
Sammanfattning : The use of lightweight parts by the vehicle industry produces immediate benefits on the reduction of emissions because less energy is consumed during the production, service, and recycle stages of a product life cycle. Therefore, the development of processes that allow high design freedom for topology optimisation and materials with high specific strength is a great need. LÄS MER