Sökning: "case hardening"

Visar resultat 6 - 10 av 64 avhandlingar innehållade orden case hardening.

  1. 6. Modeling Phase Transformations and Volume Changes during Cooling of Case Hardening Steels

    Författare :Matilda Tehler; Stefan Jonsson; Åsa Gustafson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Phase transformation; volume changes; Other materials science; Övrig teknisk materialvetenskap;

    Sammanfattning : Case hardening distortions are a major problem for gear manufacturers. The aim of the current work is to create a simulation model, able to predict how and when case hardening distortions arise. The results presented in this thesis form a basis for such a model. Two case hardening steels, with base carbon contents of 0. LÄS MER

  3. 7. Finite Element Analysis of Case-Hardened Roller Bearings

    Författare :Jan Pettersson; Roland Fortunier; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : This thesis deals with the material modelling of case-hardened bearing steel, with special reference to hardened roller bearing components. The result of a case-hardening process is a hardened component with substantially improved material properties within a restricted region beneath the heat-treated surface. LÄS MER

  4. 8. Modelling and simulation of plastic deformation on small scales : interface conditions and size effects of thin films

    Författare :Per Fredriksson; Peter Gudmundson; Christian Niordson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strain gradient plasticity; Size effects; Thin films; Interface; Finite element method; Dislocations; Constitutive behaviour; Hardening behaviour; Indentation; Contact mechanics; Metal matrix composites; Engineering mechanics; Teknisk mekanik;

    Sammanfattning : Contrary to elastic deformation, plastic deformation of crystalline materials, such as metals, is size-dependent. Most commonly, this phenomenon is present but unnoticed, such as the effect of microstructural length scales. LÄS MER

  5. 9. Deformation Behaviour of Near Fully Pearlitic Railway Steels During Monotonic and Cyclic Loading

    Författare :Niklas Köppen; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LCF; low cycle fatigue; Near fully pearlitic steels; work hardening; microstructure; tensile deformation; medium carbon steel;

    Sammanfattning : The main conclusions that could be drawn from the present work are that the deformation behaviour of fully and near fully pearlitic steels is very similar and that a combination of low temperature, prestraining and high deformation rates is critical for the performance. This was shown from microscopy studies, tensile, impact and low cycle fatigue (LCF) testing. LÄS MER

  7. 10. Modeling of Inelastic Response of Metals with Emphasis on Cyclic Viscoplasticity

    Författare :Magnus Ekh; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; large strains; integration; anisotropy; plasticity; creep; viscoplasticity; kinematic hardening; metals; damage; calibration;

    Sammanfattning : This thesis is concerned with the continuum modeling of the macroscopic behavior of engineering metals, in particular as part of life prediction strategies. Focus is primarily placed on the formulation and numerics of models for cyclic rate-dependent response. LÄS MER