Sökning: "anisotropic strain hardening"

Visar resultat 1 - 5 av 13 avhandlingar innehållade orden anisotropic strain hardening.

1. 1. On constitutive modelling in metal plasticity

   Författare :Kenneth Axelsson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; viscoplasticity; finite element; plasticity; Anisotropy; anisotropic strain hardening; Bauschinger effect; distortonal hardening; nonlinear hardening;

   Sammanfattning : .... LÄS MER

3. 2. Modeling and experimental characterization of large biaxial strains and induced anisotropy in pearlitic rail steel

   Författare :Knut Andreas Meyer; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Pearlitic steel; yield criteria; distortional hardening; axial-torsion; kinematic hardening; biaxial loading; hyperelasto-plasticity;

   Sammanfattning : Large shear strains accumulate in the near-surface region under the running band of railway rails. In this region, rolling contact fatigue cracks often initiate, causing major problems for the railway industry. LÄS MER

4. 3. Anisotropic Mechanical Behaviours and Thin-wall Effects of Additively Manufactured Austenitic Alloys

   Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Christian Leinenbach; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser powder bed fusion; Slow strain rate tensile testing; Short-term creep; Low cycle fatigue; Neutrons; Anisotropy; Crystallographic texture; Microstruc-ture; Dislocation structure; Lasersmältning i pulverbädd; Provning med långsam töjningshastighet; korttidskryp; Lågcykelutmattning; Neutroner; Anisotropi; Kristallografisk textur; Mikrostruktur; Dislokationsstruktur;

   Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a general concept of building a three-dimensional object layer-by-layer. AM breaks through the manufacturing limitations in conventionally subtractive manufacturing, leading to a great design freedom of components with complex geometries. LÄS MER

5. 4. Anisotropic mechanical behaviors and microstructural evolution of thin-walled additively manufactured metals

   Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Joe Kelleher; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; hot tensile testing; slow strain rate tensile testing; creep; anisotropy; crystallographic texture evolution; deformation twinning; Varmdragprov; Dragprov med låg töjningshastighet; kryp; anisotropi; kristallografisk textur; deformationstvillingar;

   Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a concept and method of a manufacturing process that builds a three-dimensional object layer-by-layer. Opposite to the conventional subtractive manufacturing, it conquers various limitations on component design freedom and raises interest in various fields, including aerospace, automotive and medical applications. LÄS MER

7. 5. Modelling of Inelastic Effects in Metal Sheets and Identification of Material Parameters

   Författare :Edin Omerspahic; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; plasticity; viscoplasticity; MCR mechanism; constitutive modelling; mixed hardening; damage; dynamic yield surface; material parameter identification;

   Sammanfattning : The continuum modelling of the macroscopic behaviour of metallic sheets and the identification of corresponding material parameters for models selected are dealt with in the thesis. Thermodynamics with internal variables provides a framework for the derivation of the models. LÄS MER