Sökning: "alloys"
Visar resultat 16 - 20 av 694 avhandlingar innehållade ordet alloys.
16. High performing cast aluminium-silicon alloys
Sammanfattning : The need to produce lighter components due to environmental aspects and the development of electrical vehicles represents an opportunity for cast aluminium-silicon alloys. With high specific strength, good castability, high corrosion resistance and recyclability, these alloys offer an attractive combination of properties as an alternative to steel, cast iron and titanium-based components in certain applications. LÄS MER
17. Microstructure development and mechanical properties of cast and thermo-mechanically treated eutectic high-entropy alloys
Sammanfattning : The recently emerging high-entropy alloys (HEAs) present a novel alloying strategy, significantly expanding the scope of metal alloy design. Single-phase HEAs, nevertheless, suffer from the strength-ductility trade off as seen in conventional metallic materials. LÄS MER
18. Modelling mechanical properties by analysing datasets of commercial alloys
Sammanfattning : Commercial alloys are continuously developed to improve their performance. Therefore it is important to develop new optimisation software, which could be used in development of new materials or in materials selection. In this study the mechanical properties which are important in materials selection in mechanical design are investigated. LÄS MER
19. Atomic Scale Degradation of Zirconium Alloys for Nuclear Applications
Sammanfattning : Due to their low thermal neutron capture cross-section, zirconium alloys are widely used in the nuclear industry as fuel cladding and for structural components. The lifetime of the fuel assemblies in the reactors is primarily dictated by the ability of the cladding to withstand oxidation and hydrogen pick-up from the coolant water and radiation damage induced by the neutron flux. LÄS MER
20. Alloy Design and Optimization of Mechanical Properties of High-Entropy Alloys
Sammanfattning : High-entropy alloys (HEAs) are described as alloys containing multi-principal elements in equal or close to equal atomic percentage. HEAs are considered as potential structural materials for high-temperature applications; where alloy design and optimization of mechanical properties is extremely critical. LÄS MER