Sökning: "alloying elements"
Visar resultat 1 - 5 av 140 avhandlingar innehållade orden alloying elements.
1. Role of alloying elements in Mo5Si3 intermetallics
Sammanfattning : The role of alloying elements in the intermetallic compound Mo5Si3 was studied in the alloying systems Mo5-xMxSi3 (M = Cr, Ti, Nb, Ni, or Co, x = 0.5-2). The effects of the alloying elements were examined by characterising the microstructures and identifying the resulting phases. In the case of Cr and Nb alloying, a solubility of 25% (at. LÄS MER
2. Microstructure and high temperature properties of Mo(Si,Al)2 - The effect of particle strengthening and alloying
Sammanfattning : High temperature heating processes within the steel industries result in significant emissions of CO2, primarily due to the combustion of fossil fuels. Electrification of these processes, such as through the implementation of resistive heating elements, holds great promise for reducing emissions. LÄS MER
3. Phase separation in duplex stainless steel: characterization and mitigation
Sammanfattning : Duplex stainless steel (DSS) is a category of widely used stainlesssteel, which are strategically important in a variety of applications such asin the food industry, chemical engineering plants and nuclear power plants,due to their attractive combination of mechanical properties and corrosionresistance. However, these steel grades are sensitive to the so-called ‘475°Cembrittlement’, because of a phase separation (PS) phenomenon in theferrite phase, which decomposes into Fe-rich ferrite (α) and Cr-rich ferrite(α'), when exposed to temperatures within the miscibility gap. LÄS MER
4. Towards a sustainable society : aluminium recycling and biomass energy
Sammanfattning : .... LÄS MER
5. Workpiece steels protecting cutting tools from wear : A study of the effects of alloying elements on material transfer and coating damage mechanisms
Sammanfattning : The vision of this thesis is to improve the machinability of workpiece steels. Workpiece material frequently transfers to the cutting tools during machining, and the transfer layers then forming on the tools may give both good and bad effects on machining performance and tool life. LÄS MER