Sökning: "age hardening"

Visar resultat 1 - 5 av 38 avhandlingar innehållade orden age hardening.

1. 1. Hardening concrete : measurments and evaluation of non-elastic deformation and associated restraint stresses

   Författare :Hans Hedlund; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Structural Engineering; Konstruktionsteknik;

   Sammanfattning : If a structural member of hardening concrete is restrained to some degree against expansion and contraction during the heating phase of the hydration process and the subsequent contraction phase, stresses will be induced. The issue of primary interest is whether or not these induced stresses will lead to cracking. LÄS MER

3. 2. Nanostructuring and Age Hardening in TiSCN, ZrAlN, and TiAlN Thin Films

   Författare :Lars Johnson; Lars Hultman; Axel Flink; Linköpings universitet; []
   Nyckelord :thin films; age hardening; spinodal decomposition; TiSiCN; ZrAlN; TiAlN; Transmission electron microscopy; Atom probe tomography; NATURAL SCIENCES; NATURVETENSKAP;

   Sammanfattning : This thesis explores nanostructuring in TiSiCN, ZrAlN, and TiAlN thin films deposited by cathodic arc evaporation onto cemented carbide substrates, with intended applications for cutting tools. The three systems were found to exhibit age hardening upon annealing, by different mechanisms, into the superhard regime (≥30 GPa), as determined by a combination of electron microscopy, X-ray diffraction, atom probe tomography, erda, and nanoindentation tech- niques. LÄS MER

4. 3. Thermal stability and age hardening of TiN-based thin films

   Författare :Anders Hörling; Alan Matthews; Linköpings universitet; []
   Nyckelord :NATURAL SCIENCES; NATURVETENSKAP;

   Sammanfattning : The work presented herein is about characterizing phase transformations in cathodic arc plasma-deposited Ti1-xA1xN and Ti1-zZrzN thin films for cutting tool applications, and to investigate how the films' mechanical properties are affected by such transformations during thermal annealing. Post-deposition analyses were carried out using X-ray diffraction (XRD), transmission electron microscopy (TEM), nanoindentation, four-point probe sheet resistance, differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and Rutherford backscattering spectrometry (RBS). LÄS MER

5. 4. Weld Cracking in Precipitation Hardening Ni-based Superalloys

   Författare :Fabian Hanning; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; welding; post weld heat treatment; weldability; Nickel based superalloys; strain age cracking; weld cracking;

   Sammanfattning : Manufacturing of hot structural components for aero engines requires the materials being used to be weldable. The high demands on strength and temperature resistance make nickel based superalloys the material of choice for this application. LÄS MER

7. 5. Weldability of Precipitation Hardening Superalloys – Influence of Microstructure

   Författare :Joel Håkan Andersson; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hot cracking; GTAW; Transvarestraint testing; Varestraint testing; Gleeble testing; Solidification cracking; HAZ liquation cracking; Repair welding; Strain age cracking; EBW; DSC thermal analysis;

   Sammanfattning : Superalloys and in particular the precipitation hardened Ni-based superalloys havealways been used extensively in the hot sections of jet engines. Large hot structuralengine components with complex geometry have preferably been cast as single piececomponents since the large scale vacuum investment casting process becameavailable about fifty years ago. LÄS MER