Sökning: "Yield strength"
Visar resultat 11 - 15 av 252 avhandlingar innehållade orden Yield strength.
11. Impact of Metallic Projectiles on a Ceramic Target Surface : Transition Between Interface Defeat and Penetration
Sammanfattning : The purpose of this thesis is to gain understanding of the load on flat target surfaces produced by projectile impact. Models are proposed from which upper and lower bounds can be derived for the transition be-tween interface defeat and normal penetration. LÄS MER
12. Characterisation of green-glued wood adhesive bonds
Sammanfattning : The gluing of unseasoned wood, called green gluing, is a relatively new sawmill process, implying a radically changed order of material flow in the production of value-added wood-based products. It facilitates the enhancement of raw material recovery and value yield by integrating defect elimination and gluing already before kiln drying. LÄS MER
13. Xylan sorption kinetics at industrial conditions
Sammanfattning : The kraft process is the most utilised method for the production of wood based chemical pulp for paper applications. During a kraft cook about half of the wood material is dissoluted into the cooking liquor making the liberation of individual fibres possible. This low yield is a great disadvantage for process economy. LÄS MER
14. Pulp strength enhancement by oxygen delignification
Sammanfattning : Oxygen delignification is widely used in the pulp and paper industry as a part of delignification process between the kraft cook and bleaching. However, its potential has not been fully utilized. LÄS MER
15. Thermomechanical Processing of Nickel-Base Alloy 825
Sammanfattning : Alloy 825 material was studied using a Gleeble-3800 thermosimulatorby performing single-hot compression experiments.Optical microscopy and electron backscatter diffraction wereutilized to characterize the microstructure. Dynamicrecrystallization is not considerable in the as-cast alloy anddislocation recovery is deemed to be dominant. LÄS MER