Sökning: "Windings"

Visar resultat 16 - 20 av 60 avhandlingar innehållade ordet Windings.

1. 16. On Fault Detection, Diagnosis and Monitoring for Induction Motors

   Författare :Mohammed Obaid Mustafa; Mohamed El Hachemi Benbouzid; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Model based fault detection and diagnosis; Model free fault detection; Set Membership Identification SMI ; Uncertainty Bounds Violation Method; Model based Support Vector Classification; Linear and Nonlinear Classification; Minimum Volume Ellipsoid method; Broken Rotor Bars; Faults of Induction Motors; Three phase induction motor; Reglerteknik; Control Engineering;

   Sammanfattning : In this thesis, multiple methods and different approaches have been established and evaluated successfully, in order to detect and diagnose the faults of induction motors (IMs). The aim of this thesis is to present novel fault detection and isolation methods for the case of induction machines that would have the merit to be implemented online and being characterized by specific novel capabilities, when compared with the existing techniques. LÄS MER

3. 17. Simulation and Design of a Radial-Radial Four-Quadrant Transducer for Hybrid Electric Vehicles

   Författare :Erik Nordlund; KTH; []
   Nyckelord :Electrical Machines; Hybrid Vehicles;

   Sammanfattning : This report is my licentiate thesis at the Royal Instituteof Technology, (KTH) in Stockholm. The work was done at thedepartment of Electrical Engineering, division of ElectricalMachines and Power Electronic.An internal combustion engine (ICE) in a conventionalvehicle operates rarely at optimum efficiency. LÄS MER

4. 18. Electromagnetic Modelling of Power Transformers with DC Magnetization

   Författare :Seyed Ali Mousavi; Göran Engdahl; S. V. Kulkarni; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Transformer; Hysteresis; DC magnetization; GICs; FEM; reluctance network method;

   Sammanfattning : DC currents that flow through the ground can be injected to the star windings of power transformers from their grounded neutral points and close their path with transmission lines. The geomagnetically induced currents (GICs) and AC/DC convertors of high voltage direct current (HVDC) systems are the sources of such DC currents. LÄS MER

5. 19. Analysis and Control Aspects of Brushless Induction Machines with Rotating Power Electronic Converters

   Författare :Naveed ur Rehman Malik; Chandur Sadarangani; Luca Peretti; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Doubly-fed induction generator; extended vector control; induction machine; internal model control; Lindmark concept; low voltage ride through; passive resistive network; rotating power electronic converter; rotating exciter; symmetrical faults; synchronous machine; unity power factor; unsymmetrical faults; vector control; wind turbines.; Järnvägsgruppen - Elsystem; Järnvägsgruppen - Elsystem;

   Sammanfattning : This thesis deals with the steady-state, dynamic and control aspects of new type of brushless configuration of a doubly-fed induction machine in which the slip rings and carbon brushes are replaced by rotating power electronics and a rotating exciter. The aim is to study the stability of this novel configuration of the generator under mechanical and grid disturbances for wind power applications. LÄS MER

7. 20. A lumped element transformer model including core losses and winding impedances

   Författare :David Ribbenfjärd; Göran Engdahl; Arvid Broddefalk; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; power transformer; hysteresis; dynamic hysteresis; eddy currents; excess eddy currents; leakage flux; winding model; core model; magnetic measurements; magnetic materials; Electrical engineering; Elektroteknik;

   Sammanfattning : In order to design a power transformer it is important to understand its internal electromagnetic behaviour. That can be obtained by measurements on physical transformers, analytical expressions and computer simulations. LÄS MER