Sökning: "Wall heat transfer"

Visar resultat 1 - 5 av 115 avhandlingar innehållade orden Wall heat transfer.

1. 1. Heat Flow in Building Components, Experiment and Analysis

   Författare :Petter Wallentén; Institutioner vid LTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; radiation exchange; longwave; shortwave; transient; frequency analysis; finite difference; measurements; wall; window; heat transfer coefficient; convective; full scale; natural climate; in situ; counter flow insulation; heat transfer; dynamic insulation; temperature; building; solar radiation; window model; Building construction; Byggnadsteknik;

   Sammanfattning : Three building components exposed to natural climate were studied: a dynamic insulation in the ceiling of a house, an outer wall and one window in the same wall. The term dynamic insulation implies that part of the inlet or exhaust air passes through the insulation of a house. LÄS MER

3. 2. Heat Transfer in Circulating Fluidized Bed Boilers

   Författare :Claes Breitholtz; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; similarity; char; heat transfer; tube wall; circulating fluidized bed; particle; radiation; scaling; particle convection; gas convection;

   Sammanfattning : Heat transfer to single particles in the transport zone of circulating fluidized beds and heat transfer to membrane tube walls have been investigated. The heat transfer coefficient to spheres in the transport zone of a circulating fluidized bed boiler has been measured with dark and light calorimeters. LÄS MER

4. 3. Flow Boiling Heat Transfer in Single Vertical Channels of Small Diameter

   Författare :Claudi Martin Callizo; Björn Palm; Predrag Hrnjak; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; microchannel; heat exchanger; heat transfer; flow boiling; flow patterns; onset of nucleate boiling; dryout; critical heat flux; Mechanical and thermal engineering; Mekanisk och termisk energiteknik;

   Sammanfattning : Microchannel heat exchangers present many advantages, such as reduced size, high thermal efficiency and low fluid inventory; and are increasingly being used for heat transfer in a wide variety of applications including heat pumps, automotive air conditioners and for cooling of electronics.However, the fundamentals of fluid flow and heat transfer in microscalegeometries are not yet fully understood. LÄS MER

5. 4. On Heat and Paper : From Hot Pressing to Impulse Technology

   Författare :Marco Francesco Carlo Lucisano; KTH; []
   Nyckelord :Paper; Impulse Drying; Heat Transfer; Phase Change; Heat-Pipe Effect; Delamination; Flashing;

   Sammanfattning : Impulse technology is a process in which water is removedfrom a wet paper web by the combined action of mechanicalpressure and intense heat. This results in increased dewateringrates, increased smoothness on the roll side of the sheet, andincreased density. LÄS MER

7. 5. Hydrodynamics and Heat Transfer in Vertical Falling Films with Smooth and Modified Heat-Transfer Surfaces – An Experimental and Numerical Investigation

   Författare :Anders Åkesjö; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; film thickness; local heat transfer coefficient; numerical simulations; heat transfer; falling film; VOF; evaporation.;

   Sammanfattning : High energy utilization efficiency is important to achieve a sustainable society. By having highly efficient heat exchangers, more energy can be recovered and reused at a lower cost. LÄS MER