Sökning: "WELD"

Visar resultat 1 - 5 av 166 avhandlingar innehållade ordet WELD.

  1. 1. Weld Pool Simulations

    Författare :Marcus Edstorp; Högskolan Väst; []
    Nyckelord :NATURAL SCIENCES; NATURVETENSKAP; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; NATURVETENSKAP; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; ENGINEERING AND TECHNOLOGY; Arc Welding; Weld Pool; Multiphysics Simulations; Moving Boundaries; Free Surfaces; Mesh Motion; Two-Phase Flow; Incompressible Flow; Electromagnetics; Finite Element Methods; Applied mathematics; Tillämpad matematik; Manufacturing engineering; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : This investigation is devoted to the study of welding and its effect on the workpiece, focusing on the thermo and fluid dynamical phenomena occuring during a autogenous or nonautogenous arc fusion welding process. Its aim is to simulate the behaviour of the weld pool and analyze the consequence of the solid-liquid phase change, thus obtaining a methodology for predicting the appearance of weld defects related to solidification and cooling. LÄS MER

  2. 2. Weld Pool Simulations

    Författare :Marcus Edstorp; Göteborgs universitet; Göteborgs universitet; Gothenburg University; []
    Nyckelord :NATURVETENSKAP; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Arc Welding; Weld Pool; Multiphysics Simulations; Moving Boundaries; Free Surfaces; Mesh Motion; Two-Phase Flow; Incompressible Flow; Electromagnetics; Finite Element Methods; Free Surfaces;

    Sammanfattning : This investigation is devoted to the study of welding and its effect on the workpiece, focusing on the thermo and fluid dynamical phenomena occuring during a autogenous or nonautogenous arc fusion welding process. Its aim is to simulate the behaviour of the weld pool and analyze the consequence of the solid-liquid phase change, thus obtaining a methodology for predicting the appearance of weld defects related to solidification and cooling. LÄS MER

  3. 3. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties

    Författare :Elin M. Westin; John Ågren; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; Duplex stainless steel; welding; weld metal; HAZ; nitrogen; manganese; austenite formation; phase balance; precipitates; pitting resistance; heat input; solidification; element loss; evaporation; deposition; weld oxides; discoloration; mechanical properties; thermo-mechanical simulation; Geeble; GTA; laser; LOM; SEM; EDS; TEM; Leco; EPMA; ferroxyl test; XPS; post weld cleaning; pickling; Materials science; Teknisk materialvetenskap;

    Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER

  4. 4. Predictability – an enabler of weld production development

    Författare :Anna Öberg; Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; production; weld; variation; quality; process control; predictability; proactive;

    Sammanfattning : Predictability enables proactive control of the production instead of reactive inspection. The research presented in this thesis provides insights and tools to enable predictability in weld production. LÄS MER

  5. 5. Computational weld mechanics : Towards simplified and cost effective FE simulations

    Författare :Ayjwat Awais Bhatti; Zuheir Barsoum; Lennart Josefson; KTH; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Farkostteknik; Vehicle and Maritime Engineering;

    Sammanfattning : It is the demand of the world’s ever increasing energy crisis to reduce fuel consumption wherever possible. One way of meeting this demand is by reducing the weight of a structure by replacing thick plates of low strength steel with thin plates of high strength steel in the structure. LÄS MER