Sökning: "Träfysik"
Visar resultat 1 - 5 av 20 avhandlingar innehållade ordet Träfysik.
1. Heating and drying wood using microwave power
Sammanfattning : The potentials for moisture flux in wood during microwave heating have been investigated experimentally and theoretically. The experiments were performed in three different kinds of microwave applicators. A computer model based on the finite difference method was developed to describe and predict the heat and mass transfer. LÄS MER
2. Interaction and adhesion at the interface between wood and paint, glue, lacquer measured with DMTA and SEM
Sammanfattning : The aim of the present thesis was to study the interface between wood (Pinus sylvestis) and synthetic polymers such as glue, lacquer and paint. The weakest part of these interfaces is always the bond. The long-term properties of bonds between wood and an adherend are those which are interesting. LÄS MER
3. Wood shrinkage in CT-scanning analysis
Sammanfattning : Computed tomography (CT) can be used to study wood-water interactions in differentways, such as by determining wood moisture content (MC). The determination of MCrequires two CT images: one at the unknown moisture distribution and a second one ata known reference MC level, usually oven-dry MC. The two scans are then compared. LÄS MER
4. Analysis of drying wood based on nondestructive measurements and numerical tools
Sammanfattning : Improved understanding of moisture and mechanical behaviour is a general objective for wood drying research. The main objective of this doctoral thesis was to develop nondestructive experimental methods suitable for collecting valuable response data related to the moisture behaviour and mechanical behaviour of drying wood and to refine this information into modelling parameters. LÄS MER
5. Methods for collecting and analysing simultaneous strain and moisture data during wood drying
Sammanfattning : Improved understanding of moisture and mechanical behaviour is an international objective for wood drying research. The main objective of this licentiate thesis work was to develop an experimental method suitable for collecting valuable response data related to the moisture and mechanical behaviour of drying wood. LÄS MER