Sökning: "Tool wear"
Visar resultat 21 - 25 av 168 avhandlingar innehållade orden Tool wear.
21. Inclusion Characteristics and Their Link to Tool wear in Metal Cutting of Clean Steels Suitable for Automotive Applications
Sammanfattning : This thesis covers some aspects of hard part turning of carburised steels using a poly‑crystalline cubic boron nitride (PCBN) cutting tool during fine machining. The emphasis is on the influence of the steel cleanliness and the characteristics of non‑metallic inclusions in the workpiece on the active wear mechanisms of the cutting tool. LÄS MER
22. Numerical simulation of crack growth and wear in rails
Sammanfattning : Wear and rolling contact fatigue (RCF) of rails are huge problems for the railway industry with increased world-wide occurrence during the last decades. It is, therefore, of high interest to develop tools for the prediction of wear and RCF which can be used to estimate rail life. LÄS MER
23. Wear mechanisms in sheet metal forming : Effects of tool microstructure, adhesion and temperature
Sammanfattning : .... LÄS MER
24. Simulation and Measurement of Wheel on Rail Fatigue and Wear
Sammanfattning : The life of railway wheels and rails has been decreasing in recent years. This is mainly caused by more traffic and running at higher vehicle speed. LÄS MER
25. Textured insert for improved heat extraction in combination with high-pressure cooling in turning of superalloys
Sammanfattning : Heat generated in a machining process is a common and critical obstacle faced in today's machining industries. The heat generated in the cutting zone has a direct negative influence on the tool life which, in turn contributes to increase the manufacturing costs. LÄS MER