Sökning: "Titanium alloy"

Visar resultat 21 - 25 av 55 avhandlingar innehållade orden Titanium alloy.

  1. 21. Influence of Material Variations on Machinability - Machining Difficult-to-Machine Alloys

    Författare :Stefan Cedergren; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Alloy 718; Superalloys; Ti-6Al-4V; segmented chip; 316L;

    Sammanfattning : The aim of this study is to investigate the effect of work material variations on machinability. Improved knowledge in this respect supports the development of sustainable production both from resource and economical points of view.The properties of work materials vary greatly depending on how they were manufactured. LÄS MER

  3. 22. Microstructure and mechanical properties of Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-4V : influence of H, O and B

    Författare :Raghuveer Gaddam; Barbara Shollock; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Titanium alloys; Hydrogen; Oxygen; Boron; Tensile; Compression; Fatigue; Metallography; Fractography; Materialteknik; Engineering Materials;

    Sammanfattning : Titanium and its alloys are used in a wide range of applications from aerospace, marine, biomedical implants and consumer goods, due to their superior specific strength, excellent corrosion resistance, and biocompatibility. In aerospace applications, these alloys are predominately used as components in the aero/rocket engines because of their high strength-to-density ratio compared to other metallic materials. LÄS MER

  4. 23. Modelling Aspects in Forming and Welding of Nickel-Base Superalloys

    Författare :Lluís Pérez Caro; Mats Oldenburg; Eva-Lis Odenberger; Juan Carlos Cante Teran; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; alloy 718; Haynes 282; cold forming; hot forming; material characterization; GISSMO; welding; heat treatment; manufacturing chain; springback; shape distortions; dynamic strain aging; DSA; microstructure; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : The reduction of fuel consumption and carbon dioxide emissions are currently a key factor for the aviation industry because of major concerns about climate change and more restrictive environmental laws. One way to reduce both fuel consumption and CO2 emissions is by significantly decreasing the weight of vehicles while increasing the efficiency of the engine. LÄS MER

  5. 24. From Current Collectors to Electrodes : Aluminium Rod Structures for Three-dimensional Li-ion Micro-battery Applications

    Författare :Gabriel Oltean; Kristina Edström; Leif Nyholm; Erik Kelder; Uppsala universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; 3D micro-batteries; aluminium; titanium oxide; current collectros; negative electrodes; electrodepostion; electrophoretic depostion; sol-gel synthesis;

    Sammanfattning : The potential use of 3D aluminium nanorod structures as current collectors and negative electrodes for 3D Li-ion micro-batteries was studied based on the use of relatively simple and cost-effective electrochemical and sol-gel deposition techniques.Aluminium rod structures were synthesised by galvanostatic electrodeposition using commercial porous membranes as templates. LÄS MER

  7. 25. High-performance Nickel-based Superalloys for Additive Manufacturing

    Författare :Jinghao Xu; Johan Moverare; Ru Peng; Chinnapat Panwisawas; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Nickel-based superalloy; Alloy design; Laser powder bed fusion; Cracking susceptibility; Additive manufacturability; Heat treatment; γ′ precipitate; High-temperature mechanical property; Creep; Oxidation;

    Sammanfattning : Additive manufacturing (AM), e.g., laser powder bed fusion (LPBF) technique, has become a powerful manufacturing process for producing metallic components with the advantages of design freedom, net-shape-forming flexibility, product customization, and reduced lead time to market. LÄS MER