Sökning: "Thick adhesive layer"

Hittade 5 avhandlingar innehållade orden Thick adhesive layer.

  1. 1. Application of cohesive modeling in joining technology : Thick adhesive layers and rivet joints

    Detta är en avhandling från Chalmers University of Technology

    Författare :Saeed Salimi; Högskolan i Skövde.; Högskolan i Skövde.; [2012]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Teknik; Technology; rivet joints; mixed-mode cohesive failure; mixed material; J-integral; Thick adhesive layer;

    Sammanfattning : This thesis summarizes the development of cohesive modeling of joints. It presents some new developments regarding the effects of non-zero thickness of adhesive layers and a novel approach of using the concept of cohesive modeling to characterize the failure behavior of rivet joints. LÄS MER

  2. 2. Improvement of the tissue manufacturing process

    Detta är en avhandling från Karlstad : Karlstad University

    Författare :Jonna Boudreau; Karlstads universitet.; [2009]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Chemical Engineering; Kemiteknik;

    Sammanfattning : The creping process and the conditions on the Yankee cylinder are the key factors in the production process. They need to be kept under good control in order to maintain a high and uniform quality. LÄS MER

  3. 3. On the Mechanisms behind the Tribological Performance of Stellites

    Detta är en avhandling från Uppsala : Acta Universitatis Upsaliensis

    Författare :Daniel H. E. Persson; Uppsala universitet.; [2005]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Stellite; Co-based; phase transformation; fcc; hcp; texture; alignment; low-friction; laser cladding; Materialvetenskap; TECHNOLOGY Materials science; TEKNIKVETENSKAP Teknisk materialvetenskap;

    Sammanfattning : This thesis reveals the tribological mechanisms behind the intrinsic low friction potential of the Co-based family of alloys called Stellites. Although being an established and important group of materials, a satisfactory explanation to why they exhibit low-friction properties under severe sliding conditions has not previously been found in the literature. LÄS MER

  4. 4. Mechanisms of Blister Formation on Concrete Bridge Decks with Waterprooving Asphalt Pavement Systems

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Biruk Wobeshet Hailesilassie; KTH.; [2013]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; blister growth; PBM waterproofing membrane; orthotropic material; biaxial test; peeling test; elliptical blister growth;

    Sammanfattning : Bridge decks are commonly subjected to harsh environmental conditions that often lead to serious corrosion problems triggered by blisters under the hot mix asphalt bridge deck surfacing and secretly evolving during weather exposure until damage is often detected too late. Blisters may form under both the waterproofing dense mastic asphalt layer or under the waterproofing membrane which is often applied as additional water protection under the mastic asphalt (MA). LÄS MER

  5. 5. Dentin surface conditioning : The role of collagen in dentin bonding

    Detta är en avhandling från Stockholm : Karolinska Institutet, Department of Odontology

    Författare :Andreas Cederlund; Karolinska Institutet.; Karolinska Institutet.; [2002]

    Sammanfattning : Summary - Preparation of dental cavities inevitably produces a thin layer of smear, which covers dentin and enamel surfaces. This smear layer, which is between 1 and 10 gm thick, consists of hydroxyapatite, denatured collagen and remnants of cariogenic bacteria. If left untouched, it will weaken the bond between filling material and cavity wall. LÄS MER