Sökning: "Thermal Modeling"
Visar resultat 16 - 20 av 314 avhandlingar innehållade orden Thermal Modeling.
16. Electrothermal Simulation in a Concurrent Waveform Relaxation Based Circuit Simulator
Sammanfattning : The main purpose of this work is to study methods to simulate electro-thermal effects in integrated circuits using CONCISE a waveform relaxation based circuit simulator. WR is a method that is suitable to run on a multi-computer with state of the art computing power. Especially CMOS VLSI circuits have been simulated successfully with WR. LÄS MER
17. Modeling of Pulverised Wood Flames
Sammanfattning : The aim of the current work was at development and validation of modeling tools for simulation of pulverised wood flames in furnaces and study how different factors influence on such flames. The numerical model involves different sub-models for the physo-chemical processes, such as, two-phase flow motion, drying, devolatilization and shrinkage of particles, the formation and oxidation of volatile, tar and char, turbulence-chemistry interaction, turbulence-radiation interaction, etc. LÄS MER
18. Electric Traction Machine Design for an E-RWD Unit
Sammanfattning : Since the first generation of the Toyota Prius was introduced in December 1997, the number of Hybrid Electric Vehicles (HEVs) and pure Electric Vehicles (EVs) available in the market has increased substantially. The growing competition existent puts high demands on the electric system as well as the rest of the vehicle. LÄS MER
19. Thermal Aspects and Electrolyte Mass Transport in Lithium-ion Batteries
Sammanfattning : Temperature is one of the most important parameters for the performance, safety, and aging of lithium-ion batteries and has been linked to all main barriers for widespread commercial success of electric vehicles.The aim of this thesis is to highlight the importance of temperature effects, as well as to provide engineering tools to study these. LÄS MER
20. Heat transfer phenomena and mould flux lubrication in continuous casting of steel
Sammanfattning : Overall thermal resistance of the mould flux was measured tomake clear the influence of the mould flux properties on theheat transfer behavior in continuous casting, especiallythermal conductivity and the formation of air gaps in thisstudy. From the investigation of the effect of the mouldsurface temperature and physical properties of the mould fluxon heat transfer through the flux film, following knowledge hasbeen obtained. LÄS MER