Sökning: "Tempering Carbides"

Visar resultat 1 - 5 av 9 avhandlingar innehållade orden Tempering Carbides.

  1. 1. Effect of austenitising temperature and cooling rate on microstructures of hot-work tool steels

    Detta är en avhandling från Trollhättan : University West

    Författare :María Teresa Coll Ferrari; Leif Karlsson; Hans-Olof Andrén; [2015]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tool steel; Heat Treatment; Austenitising Temperature; Large Tools; Tempering Carbides; Bainitic Microstructures; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : The average size of hot-work tools has gradually increased over the past years.This affects the effective temperature cycle tools experience during hardening,as large dimensions prevent uniform and rapid cooling, and thereby the resulting microstructures and properties. LÄS MER

  2. 2. Study of precipitation in martensitic Fe-C-Cr alloys during tempering Experiments and modelling

    Detta är en avhandling från Stockholm : KTH Royal Institute of Technology

    Författare :Ziyong Hou; Joakim Odqvist; Andersson Jörgen; [2015]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fe-C-Cr alloy; Microstructure; Precipitates; Tempering of martensite; Electron microscopy; Modelling.; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning : Understanding the precipitation reaction is very important since precipitation hardening is one of the most effective strengthening mechanisms in metallic alloys. In martensitic steels, a tempering heat treatment is often performed. LÄS MER

  3. 3. Effect of heat treatment on microstructure and mechanical properties of a 5 wt.% Cr cold work tool steel

    Detta är en avhandling från Trollhättan : University West

    Författare :Arbab Rehan; Lars-Erik Svensson; Leif Karlsson; Anna Medvedeva; Per Erik Skogholm; Berne Högman; Reinhold Schneider; [2019]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cold work tool steel; Hardening; Tempering; Microstructural characterisation; Retained austenite; Martensite; Bainite; Hardness; Impact toughness; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : This work presents investigations related to phase transformations occurring inthe 5 wt.% Cr cold work tool steel Caldie during hardening and tempering treatments. LÄS MER

  4. 4. Microstructure and mechanical properties of a 5 wt.% Cr cold work tool steel Influence of heat treatment procedure

    Detta är en avhandling från Trollhättan : University West

    Författare :Arbab Rehan; Lars-Erik Svensson; Leif Karlsson; [2017]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cold work tool steel; Heat treatment; Microstructural characterisation; Mechanical properties; Retained austenite; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : The demand for Advanced High Strength Steel (AHSS) in the automotive industry is increasing day by day. It is mainly motivated by the fact that AHSS can be used as thin sheets while having high strengths. LÄS MER

  5. 5. Precipitation Reactions at High Temperatures in 9-12% Chromium Steels

    Detta är en avhandling från Trollhättan : University West

    Författare :Mats Hättestrand; [2000]
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; thermo-dynamical simulations; creep resistant; 9-12% chromium steel; energy filtered TEM; precipitates; atom probe field ion microscopy; quantitative metallography;

    Sammanfattning : This thesis reports on quantitative investigations of microstructural changes, mainly precipitation reactions, occurring during heat treatment, ageing and creep of 9-12% chromium steels. Several alloys with varying composition have been investigated. LÄS MER