Sökning: "TECHNOLOGY Engineering mechanics"

Visar resultat 16 - 20 av 2060 avhandlingar innehållade orden TECHNOLOGY Engineering mechanics.

  1. 16. Assessment of Experimental, Computational, and Combined EFD/CFD Methods for Ship Performance Prediction

    Författare :Kadir Burak Korkmaz; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; numerical friction line; form factor; CFD; measurement uncertainty; power prediction; EFD; verification and validation; Combined CFD EFD Methods;

    Sammanfattning : In today’s highly competitive market, alongside increasingly stringent regulatory requirements, the precise prediction of ship performance has assumed paramount importance for both design verification and operational evaluations. This thesis addresses the need for a comprehensive assessment of Experimental Fluid Dynamics (EFD), Computational Fluid Dynamics (CFD), and their combination to enhance the accuracy of performance predictions. LÄS MER

  3. 17. Indirect System Identification for Unknown Input Problems : With Applications to Ships

    Författare :Jonas Linder; Martin Enqvist; Fredrik Gustafsson; Alexandre Sanfelice Bazanella; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; System identification; Model structure; Unknown inputs; Indirect input measurements; Physical models; Instrumental variable; Closed loop; Graybox model; Identifiability; Ship; Marine vessel; Operational safety; Inertial measurement unit;

    Sammanfattning : System identification is used in engineering sciences to build mathematical models from data. A common issue in system identification problems is that the true inputs to the system are not fully known. In this thesis, existing approaches to unknown input problems are classified and some of their properties are analyzed. LÄS MER

  4. 18. Fatigue improvement of steel bridges with high-frequency mechanical impact treatment

    Författare :Poja Shams Hakimi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; HFMI; thickness effect; bridge; steel; variable amplitude; fatigue;

    Sammanfattning : This thesis investigates the performance of fatigue-improved welds with high-frequency mechanical impact (HFMI) for application on new bridges. Fatigue strength improvement with HFMI can enable lightweight design of bridges and allow the utilisation of the benefits of high-strength steels. LÄS MER

  5. 19. Large-eddy simulation on the effects of fuel injection pressure on gasoline spray characteristics

    Författare :Sandip Wadekar; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; High pressure fuel-injection; GDI engine; LES; Spray characteristics;

    Sammanfattning : Increasing the injection pressure in gasoline direct injection engines has a substantial potential to reduce emissions while maintaining high efficiency in spark ignition engines. Present gasoline injectors operate at pressures of 20 to 30 MPa. LÄS MER

  7. 20. Assessment of human swallowing using in-vivo and in-vitro approaches

    Författare :Muhammad Waqas; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; in-vitro manometery; In-vitro simulations; In-vivo analysis; microstructure analysis; extensional rheology; dysphagia; Ultrasound viscometry; Bolus Rheology;

    Sammanfattning : Texture modification is the most vital strategy to manage dysphagia: a condition in which food and beverages are difficult to swallow. Typically thickeners in the form of starch or gums are added to the food to increase the viscosity and thereby reduce the speed of bolus flow. LÄS MER