Avancerad sökning

Visar resultat 1 - 5 av 247 avhandlingar som matchar ovanstående sökkriterier.

  1. 1. Large-Eddy Simulation of Gasoline Fuel Spray Injection at Ultra-High Injection Pressures

    Författare :Sandip Wadekar; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; LES; High pressure fuel injection; spray-wall interaction; spray-turbulence interaction; GDI engine; Spray modeling;

    Sammanfattning : Gasoline direct injection is a state-of-the-art technique that reduces hydrocarbon and particulate emissions. However, further improvement is needed to meet current as well as future emission regulations. LÄS MER

  2. 2. Thermal insulation of the combustion chamber in a light duty diesel engine

    Författare :Joop Somhorst; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; temperature swing; crevice effect.; porosity; heat transfer; surface roughness; efficiency; diesel engine; surface sealing; thermal barrier coating;

    Sammanfattning : Reduction of heat loss from the combustion chamber in an engine has great potential to decrease fuel consumption and CO2 emissions. Research on thermal barrier coatings (TBC) has been performed since the early eighties to address this potential. LÄS MER

  3. 3. Optimization of Vehicle Structures under Uncertainties

    Författare :Sandeep Shetty; Larsgunnar Nilsson; Kaj Fredin; Alexander Govik; Mårten Olsson; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : Advancements in simulation tools and computer power have made it possible to incorporate simulation-based structural optimization in the automotive product development process. However, deterministic optimization without considering uncertainties such as variations in material properties, geometry or loading conditions might result in unreliable optimum designs. LÄS MER

  4. 4. Advances In Heavy Vehicle Dynamics with Focus on Engine Mounts and Individual Front Suspension

    Författare :Hoda Yarmohamadi; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vibration isolation; semi-active damper; handling; heavy vehicle; individual front suspension; nonlinear dynamic stiffness and damping; kinematics; adaptronic mounting system; engine mount; comfort;

    Sammanfattning : The main objective of the research presented in this thesis is to enhance driver comfort and handling of a heavy truck that in turn leads to better vehicle safety and stability. The focus has been put on studying two suspension systems of the truck, engine and front axle suspensions, due to their significant impact on the dynamic performance of the vehicle. LÄS MER

  5. 5. Dynamics of Vehicle-Deck Interactions

    Författare :Junbo Jia; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vehicle-deck interactions; Lightweight structure; Vehicle dynamics; Vibration analysis.; Lashing; Vehicle securing; Ship motions; Modal testing; Finite element analysis;

    Sammanfattning : The work presented in this thesis concerns the modelling and analysis of vehicle-ship deck interactions. The physical modelling of vehicles is discussed together with the modelling of supporting structures/ship decks, and the interactions between vehicles and supporting structures. LÄS MER