Avancerad sökning

Visar resultat 1 - 5 av 32 avhandlingar som matchar ovanstående sökkriterier.

1. 1. Corrosion of Ferritic Stainless Steels Used in Solid Oxide Fuel Cells

   Författare :Claudia Goebel; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; SOFC; Corrosion; Dual Atmosphere; Interconnect; Area Specific Resistance;

   Sammanfattning : Solid oxide fuel cells (SOFC) are energy conversion systems with clean emissions (depending on the fuel used) and high electrical efficiencies, which could potentially replace conventional conversion systems such as combustion engines. However, other issues, such as high costs and limited lifetime, must be resolved before widespread commercialization of SOFCs can be achieved. LÄS MER

3. 2. From Macro to Nano : Electrokinetic Transport and Surface Control

   Författare :Gaspard Pardon; Wouter van der Wijngaart; Philippe Renaud; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; microsystem; nanosystem; microfluidic; nanofluidic; surface modification; surface property; electrokinetics; model; simulation; material; polymer; thiol-ene; microfabrication; nanofabrication; micromanufacturing; nanomanufacturing; breath sampling; aerosol precipitation; corona discharge; electrostatic precipitation; grafting chemistry; click chemistry; nanopore; nanoporous membrane; photolithography; photopatterning; photografting; microfluidics; nanofluidics; oste; OSTE ; OSTEmer; lab-on-chip; loc; point-of-care; poc; biocompatibility; diagnostics; breath analysis; fuel cell; Electrical Engineering; Elektro- och systemteknik; Teknisk materialvetenskap; Materials Science and Engineering; Fysik; Physics; Medical Technology; Medicinsk teknologi;

   Sammanfattning : Today, the growing and aging population, and the rise of new global threats on human health puts an increasing demand on the healthcare system and calls for preventive actions. To make existing medical treatments more efficient and widely accessible and to prevent the emergence of new threats such as drug-resistant bacteria, improved diagnostic technologies are needed. LÄS MER

4. 3. Thin Film and Plasma Characterization of PVD Oxides

   Författare :Ludvig Landälv; Per Eklund; Emmanuelle Göthelid; Björn Alling; Lars Hultman; Erik Lewin; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES;

   Sammanfattning : The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite(WC-Co) coated with different combinations of carbide, nitride and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. LÄS MER

5. 4. Thermal Barrier Coatings : Failure Mechanisms and Life Prediction

   Författare :Krishna Praveen Jonnalagadda; Ru Lin Peng; Xin-Hai Li; Robert Eriksson; Nicholls John; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : Thermal barrier coatings (TBCs) use in the hot sections of gas turbine engine enables them to run at higher temperatures, and as a consequence, achieve higher thermal efficiency. For full operational exploitation of TBCs, understanding their failure and knowing the service life is essential. LÄS MER

7. 5. Preparation and characterization of graphene/metal composites

   Författare :Kristoffer Harr Martinsen; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; graphene oxide; metal matrix composite; Copper; surface functionalization; anticorrosion.;

   Sammanfattning : Since the isolation of graphene in 2004, much research has been conducted to understand this novel material and how its properties can be utilized in different applications. One type of venture involves graphene as a reinforcing filler in metal matrix composites (MMC) which is becoming increasingly prevalent in the automotive and aerospace industries. LÄS MER