Sökning: "Sweden Göteborg Chalmers University of Technology"

Visar resultat 1 - 5 av 17 avhandlingar innehållade orden Sweden Göteborg Chalmers University of Technology.

  1. 1. Challenges of renovating the Gothenburg multi-family building stock - An analysis of comprehensive building-specific information, including energy performance, ownership and affordability

    Författare :Mikael Mangold; Seppo Junnila; Sweden Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aging building stock; Energy performance certificate; Energy retrofitting; Equity; GIS; Göteborg; Measured energy usage; Multi-family dwellings; Social sustainability; Tenure;

    Sammanfattning : In Sweden and many European countries, the building stock increased at a rapid pace during the period of 1950-1975. This aging building stock is in need of renovation which is a challenge and an opportunity in reaching the energy performance targets as well as decreasing societal inequities. LÄS MER

  2. 2. Experimental methods to determine model parameters for failure modes of CFRP

    Författare :Daniel Svensson; Ulf Stigh; Svante Alfredsson; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; composite; delamination; compressive failure; energy release rate; cohesive modelling; Teknik; Technology;

    Sammanfattning : The focus of this thesis is to develop methods to predict the damage response of Carbon Fibre Reinforced Polymers (CFRP). In the pursuit of reducing the manufacturing cost and weight of CFRP components, it is crucial to enable modelling of the non-linear response associated with various failure modes. LÄS MER

  3. 3. Effect of rough surface anisotropy on friction in gears

    Författare :Li Xiao; Bengt-Göran Rosén; Naser Amini; Sweden Göteborg Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Friction; Surface topography; Roughness; Lay; Gears; Efficiency; Power transmission; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : .... LÄS MER

  4. 4. Feed-forward Control and Dynamic Modelling in Temperature Control of Buildings

    Författare :Mohsen Soleimani-Mohseni; Bertil Thomas; Lennart Jagemar; Lars Jensen; Sweden Göteborg Chalmers University of Technology; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Sammanfattning : .... LÄS MER

  5. 5. Large-Eddy Simulation of the Flow around Simplified High-Speed Trains under Side Wind Conditions , thesis of Lic. of Engng, Division of Fluid Dynamics, Dept. of Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden, 2006

    Författare :Hassan Hemida; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flow structures; Side winds; Vehicles design.; High speed trains; LES;

    Sammanfattning : The flows around high speed trains, subjected to side winds, are solved using Large Eddy Simulation (LES). Two train models have been used: generic model and more realestic model (the ICE2 train) in the investigations. LÄS MER