Sökning: "Surface pre-treatment"
Visar resultat 1 - 5 av 30 avhandlingar innehållade orden Surface pre-treatment.
Sammanfattning : The potential to use acidic hydrogen peroxide in the presence of ferrous ions (Fenton’s reagent) as a pre-treatment when producing microfibrillar cellulose (MFC) from a fully bleached birch (Betula verucosa) kraft pulp was investigated and the properties of the produced MFC was compared to the properties of a MFC produced with enzymatic pre-treatment with a monocomponent endoglucanase (FiberCare® R). The mechanical treatment to MFC was performed in a laboratory colloid mill or in a pilot high-pressure homogeniser and the pre-treated pulps as well as the produced MFCs were chemically and morphologically characterised. LÄS MER
Sammanfattning : Surface preparation prior to thermal spraying is a key factor in ensuring a good adhesion of the coating onto the part to be coated. Surface pre-treatment conditions and methods have mainly been developed experimentally and have changed little over the years. LÄS MER
Sammanfattning : The continuous and aggressive dimensional miniaturization ofthe conventional complementary-metal-oxide semiconductor (CMOS)architecture has been the main impetus for the vast growth ofIC industry over the past decades. As the CMOS downscalingapproaches the fundamental limits, unconventional materials andnovel device architectures are required in order to guaranteethe ultimate scaling in device dimensions and maintain theperformance gain expected from the scaling. LÄS MER
Sammanfattning : .... LÄS MER
5. ATMP Process : Improved Energy Efficiency in TMP Refining Utilizing Selective Wood Disintegration and Targeted Application of Chemicals
Sammanfattning : This thesis is focused on the novel wood chip refining process called AdvancedThermomechanical Pulp (ATMP) refining. ATMP consists of mechanical pretreatmentof chips in Impressafiner and Fiberizer prior to first stage refining atincreased intensity. LÄS MER