Sökning: "Strain hardening"

Visar resultat 16 - 20 av 140 avhandlingar innehållade orden Strain hardening.

  1. 16. Weld Cracking of Precipitation Hardening Ni-based Superalloys - Investigation of repair welding characteristics and susceptibility towards strain age cracking

    Författare :Fabian Hanning; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gleeble; Haynes 282; Waspaloy; welding; ATI 718Plus®; weldability; post-weld heat treatment; weld cracking; strain age cracking; hot cracking; Nickel-based superalloys;

    Sammanfattning : High temperature resistance and strength requirements make nickel-based superalloys the material of choice for the hot section of aero engines. Fabrication in terms of combining wrought and cast parts in the manufacturing of hot structural components enables component optimisation via the use of wrought high-strength parts, where geometrical constraints allow, and cast parts to produce complex geometries. LÄS MER

  3. 17. Modelling and simulation of plastic deformation on small scales : interface conditions and size effects of thin films

    Författare :Per Fredriksson; Peter Gudmundson; Christian Niordson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strain gradient plasticity; Size effects; Thin films; Interface; Finite element method; Dislocations; Constitutive behaviour; Hardening behaviour; Indentation; Contact mechanics; Metal matrix composites; Engineering mechanics; Teknisk mekanik;

    Sammanfattning : Contrary to elastic deformation, plastic deformation of crystalline materials, such as metals, is size-dependent. Most commonly, this phenomenon is present but unnoticed, such as the effect of microstructural length scales. LÄS MER

  4. 18. Material characterisation for simulation of press hardening

    Författare :Paul Åkerström; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : The growing effort to reduce vehicle weight and improve passive safety in the automotive industry has drastically increased the demand for ultra high strength steel components. There exist several production methods for such components, where the press hardening technique (hot stamping) is one of the most successful in producing complex components from boron steel. LÄS MER

  5. 19. High strain rate deformation of Alloy 718

    Författare :Joakim Johansson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Split-Hopkinson; Alloy 718; Johnson-Cook;

    Sammanfattning : Alloy 718 is a high temperature alloy, used where high temperature strength or oxidation resistance is required. As the alloy is precipitate heat treatable it is possible to have a large variety of strength depending on microstructure. LÄS MER

  7. 20. Flow stress and strain hardening in cold rolling of strip - Experimental investigations and models

    Författare :Zong-Hai Ding; KTH; []
    Nyckelord :;

    Sammanfattning : .... LÄS MER