Sökning: "Steel testing"
Visar resultat 1 - 5 av 160 avhandlingar innehållade orden Steel testing.
1. Toughness of Tool Steel
Sammanfattning : Toughness is the ability to resist tensile stresses in the presence of a notch or crack. Sometimes gross cracking of industrial tools, mould or dies, occurs due to insufficient toughness. As the economic consequences of the gross cracking are serious, the toughness of industrial tool material, generally tool steel, is of paramount importance. LÄS MER
2. Stainless steel plasticity : material modelling and structural applications
Sammanfattning : The thesis addresses stainless steel in construction with focus on plasticity and shear resistance of welded girders respectively. In the area of plasticity it comprises an account of an experimental study with emphasis on phenomenological observations followed by theorethical modelling. LÄS MER
3. Corrosion testing of heat exchanger tubing
Sammanfattning : Heat exchanger tubes are commonly made from stainless steel.In a heat exchanger both the process fluid and the cooling orheating media can be corrosive. It is therefore important to beable to select materials that do not suffer from corrosion.Current methods in this area, however, suffer from limitationsand shortcomings. LÄS MER
4. Alternative binder hardmetals for steel turning
Sammanfattning : The goal of this work is to understand how the wear and deformation mechanisms of hardmetalinserts change when the cobalt binder phase is replaced with a dierent metal or analloy. The focus is on inserts for steel turning. The work presented in this licentiate thesisconsists of the rst steps. LÄS MER
5. Effect of Stress Relief Annealing: Part Distortion, Mechanical Properties, and Microstructure of Additively Manufactured Austenitic Stainless Steel
Sammanfattning : Additive manufacturing (AM) processes may introduce large residual stresses in the as-built part, in particular the laser powder bed fusion process (L-PBF). The residual stress state is an inherent consequence of the heterogeneous heating and subsequent cooling during the process. LÄS MER