Sökning: "Steel corrosion"
Visar resultat 16 - 20 av 210 avhandlingar innehållade orden Steel corrosion.
16. High temperature corrosion during waste incineration : characterisation, causes and prevention of chlorine-induced corrosion
Sammanfattning : Waste-fired boilers suffer severely from corrosion of critical components such as superheater tubes. In this work the high temperature corrosion of candidate superheater alloys have been investigated by detailed laboratory studies and controlled field exposures in full-scale boilers. LÄS MER
17. Localised corrosion and atmospheric corrosion of stainless steels
Sammanfattning : This research is focused on defining limiting conditions for corrosion of stainless steels. The aim of the first part (Papers I-IV) was to understand the role of alloying level and environmental parameters on localised corrosion in aqueous conditions. LÄS MER
18. Corrosion testing of heat exchanger tubing
Sammanfattning : Heat exchanger tubes are commonly made from stainless steel.In a heat exchanger both the process fluid and the cooling orheating media can be corrosive. It is therefore important to beable to select materials that do not suffer from corrosion.Current methods in this area, however, suffer from limitationsand shortcomings. LÄS MER
19. Superheater corrosion in biomass and waste fired boilers : Characterisation, causes and prevention of chlorine-induced corrosion
Sammanfattning : Biomass and waste fired boilers suffer severely from corrosion of critical components such as superheater tubes. In this work high temperature corrosion of superheater alloys, and methods to mitigate the problem, have been investigated by laboratory studies and controlled field exposures in commercial boilers. LÄS MER
20. Corrosion of ferritic stainless steels used in solid oxide fuel cells - Investigation of novel coatings in single- and dual-atmosphere conditions
Sammanfattning : Solid Oxide Fuel Cells (SOFCs) are systems that convert chemical energy into electrical energy. Their high electrical efficiency and clean emissions (when H2 is used as fuel) make them a strong candidate for replacing conventional conversion systems, such as combustion engines. LÄS MER