Avancerad sökning
Visar resultat 1 - 5 av 66 avhandlingar som matchar ovanstående sökkriterier.
1. The influence of tool steel microstructure on galling
Sammanfattning : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a sort of severe adhesive wear, which results in severe scratching of produced parts. LÄS MER
2. Alloys in Contact with Molten Salts for Thermal Storage Applications
Sammanfattning : The combination of a concentrated solar power (CSP) plant and a thermal energy storage (TES) system is a promising technology for power generation, in that it overcomes the challenges commonly faced by renewable energy systems, such as intermittency, dispatchability, and the gap between the energy supply and energy demand. The third generation (Gen3) CSP plants are designed to increase plant efficiency by using supercritical carbon dioxide (sCO2) instead of steam for the Brayton cycle gas turbines, requiring a minimum operating temperature of 750°C for the TES materials. LÄS MER
3. Tribology of stamping : the influence of designed steel sheet surface topography on friction
Sammanfattning : Tribology is the science of friction, wear, and lubrication; the interaction of surfaces in relative motion. The tribological conditions in sheet metal forming influences the flow of material in forming operations, the strain distributions of sheet material, extent of wear, and thereby the quality of products. LÄS MER
4. Improved Oxidation Resistance and Reduced Cr Vaporization from Thin-Film Coated Solid Oxide Fuel Cell Interconnects
Sammanfattning : High electrical efficiency, clean emissions, and the possibility to operate on a great variety of fuels, such as hydrogen, alcohols and hydrocarbons are some advantages of Solid Oxide Fuel Cell (SOFC) technology. Too short lifetimes and high production costs have, however, limited the commercialization of this technology. LÄS MER
5. ROLE OF SURFACE OXIDES IN SINTERING OF CHROMIUM-ALLOYED STEEL POWDER
Sammanfattning : During water-atomisation and handling of steel powder the surface inevitably oxidises. The surface bound oxide is an important factor in the processing of powder metallurgical (PM) steels, especially in case the powder contains elements forming stable oxides, such as Cr, Mn, and Si. LÄS MER