Sökning: "Splat"

Hittade 5 avhandlingar innehållade ordet Splat.

  1. 1. A Study of the Adhesion Strength of Plasma Sprayed Coatings

    Författare :Fouzi Bahbou; Chalmers University of Technology; []
    Nyckelord :Splat.; Surface roughness; Mechanical anchoring; Grit blasting; Adhesion strength; Protal® process; Fractal analysis; Thermal spraying; Coating; Surface pre-treatment;

    Sammanfattning : Surface preparation prior to thermal spraying is a key factor in ensuring a good adhesion of the coating onto the part to be coated. Surface pre-treatment conditions and methods have mainly been developed experimentally and have changed little over the years. LÄS MER

  2. 2. A study of the adhesion strength of plasma sprayed coatings

    Författare :M. Fouzi Bahbou; Högskolan Väst; []
    Nyckelord :ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; ENGINEERING AND TECHNOLOGY; Grit blasting; Thermal spraying; Coating; Surface pre-treatment; Surface roughness; Fractal analysis; Adhesion strength; Mechanical anchoring; Protal® process; Splat; Manufacturing engineering; Produktionsteknik; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : .... LÄS MER

  3. 3. Investigation of microstructure and porosity of columnar yttria-stabilized zirconia coatings produced by axial suspension plasma spraying

    Författare :Johanna Ekberg; Chalmers University of Technology; []
    Nyckelord :NATURVETENSKAP; TEKNIK OCH TEKNOLOGIER; NATURAL SCIENCES; ENGINEERING AND TECHNOLOGY; X-ray microscopy; thermal barrier coatings; NMR cryoporometry; suspension plasma spraying; scanning electron microscopy; porosity measurements;

    Sammanfattning : Ceramic topcoats provide thermal barrier coatings (TBCs) with its heat insulating properties. The heat transfer is primarily occurring by conduction through the bulk material, therefore features such as interfaces, pores and grain boundaries are essential for thermal insulation as they act as scattering sites. LÄS MER

  4. 4. The Chemical ecology of the oriental fruit fly Bactrocera dorsalis and the potential for novel odor-based management tools

    Författare :Tibebe Dejene Biasazin; Sveriges lantbruksuniversitet; Sveriges lantbruksuniversitet; []

    Sammanfattning : Over the last few years, several tephritid species have invaded sub-Saharan Africa, competitively displacing native fruit fly pests, and severely affecting horticulture production. In two different farming scales, small and large, we verified the influence of suppressing the invasive Bactrocera dorsalis using the male specific attractant, methyl eugenol (ME), formulated in SPLAT-spinosad. LÄS MER

  5. 5. Erosion - Corrosion Resistance and Adhesion of Laser and Thermally Deposited Coatings in Fluidised Beds

    Författare :Anders Hjörnhede; Chalmers University of Technology; []
    Nyckelord :coating; fluidised bed; HVOF; laser cladding; CFB; FBC; adhesion testing; PFBC; thermal spraying; arc spray; erosion - corrosion; acoustic emission;

    Sammanfattning : High temperature erosion - corrosion is the major source for degradation of components such as heat exchangers, tubes, cyclones and water walls used in Fluidised Bed Combustion (FBC) plants. By coating the exposed components with a protective material, the degradation rate can be decreased. LÄS MER