Sökning: "Spinel inclusion"
Visar resultat 1 - 5 av 10 avhandlingar innehållade orden Spinel inclusion.
1. Three Dimensional Determinations of Inclusions in Ferroalloys and Steel Samples
Sammanfattning : As the requirements on material properties increase, there has been a demand on an additional knowledge on the effect of impurities in the ferroalloyson the steel cleanness. Thus, the number, morphology, size and composition of inclusions in sixdifferent ferroalloys (FeTi, FeNb, FeSi,SiMn, LC and HC FeCr) were investigatedin this study. LÄS MER
2. Some aspects of non-metallic inclusions during vacuum degassing in ladle treatment : with emphasize on liquid CaO-Al2O3 inclusions
Sammanfattning : The present thesis was to study non-metallic inclusions during vacuum degassing in ladle treatment. Emphasize was mostly given to liquid CaO-Al2O3 inclusions. A series of industrial experiments were carried out at Uddeholm Tooling AB, Hagfors, Sweden. To gain an insight into the industrial findings, laboratory investigations were also performed. LÄS MER
3. Parameters influencing inclusion compositions in Al-killed steel melts during a secondary refining process
Sammanfattning : This study was carried out to clarify the factors influencing the evolution of inclusions in Al-killed steel melts during a secondary refining process. First, a case-hardening steel was the subject of study to understand the factors influencing the inclusion compositions in the steel melt. LÄS MER
4. Formation of oxide-inclusions by ladle glaze and a preliminary examination on the possibility of inclusion seperation by bubble floatation
Sammanfattning : The present work was to study the role of ladle glaze as apotential supplier of inclusions to the steel melt during theladle refining process. In this study, the total number ofinclusions at the beginning and at the end of the ladletreatment process was found to be increasing with ladle age,which is the number of heats, the ladle being used. LÄS MER
5. A study of slag-steel-inclusion interaction during Ladle treatment
Sammanfattning : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. LÄS MER