Sökning: "Solid modelling"
Visar resultat 1 - 5 av 312 avhandlingar innehållade orden Solid modelling.
1. Modelling elements in conversion of solid fuels - fixed bed combustion and gaseous radiation
Sammanfattning : For a long heat and power production by combustion of solid fuels has time been an established technique. Environmental concern of emissions for NOx, SOx and other harmful species has caused an increasingly stricter legislation on the emission levels of the boilers. LÄS MER
2. Transverse anisotropy in softwoods : Modelling and experiments
Sammanfattning : Transverse anisotropy is an important phenomenon of practical and scientific interest. Although the presence of ray tissue explains the high radial modulus in many hardwoods, experimental data in the literature shows that this is not the case for pine. LÄS MER
3. Long-term metal retention processes in a peat bog : Field studies, data and modelling
Sammanfattning : The study was inspired by the need to assess long-term metal retention in municipal solid waste (MSW) landfills. The long-term processes in landfills are poorly known due to the relatively short time that such landfills have been in existence. Natural analogues where similar metal binding processes could be expected were therefore sought for. LÄS MER
4. Near Surface High Resolution Seismic Imaging of Glacial Deposits in Sweden at the Heby and Marsta Sites
Sammanfattning : Near surface seismic methods have the potential for mapping theoverburden and bedrock in the Nordic environment. They can provideeffective information about shallow glacial deposits and groundwaterresources in Sweden. LÄS MER
5. Failure of thermal barrier coatings under thermal and mechanical fatigue loading : microstructural observations and modelling aspects
Sammanfattning : Industrial and air-borne gas turbine hot components suffer from creep, oxidation, corrosion and microstructural degradation if not shielded from the hot and aggressive combustion gases. Two major strategies commercially available are adopted; film cooling by pressurised air and application of protective coatings. LÄS MER