Sökning: "Solid Mechanics"
Visar resultat 21 - 25 av 322 avhandlingar innehållade orden Solid Mechanics.
21. Experimental Characterization of Electrodes and Multi-Scale Modeling of Swelling Induced Stresses in Lithium-ion Batteries
Sammanfattning : Over the last few decades, rechargeable lithium-ion batteries have been extensively used in portable instruments due to their high energy density and low self-discharge rate. Recently, lithium-ion batteries have emerged as the most promising candidate for electric vehicles and stationary energy storage. LÄS MER
22. Creep aspects of softwood from the cell-wall level to structures
Sammanfattning : This thesis addresses the intricate mechanical behaviour of natural materials, with a particular focus on wood. Despite millennia of use, understanding the mechanical behaviour of wood materials remains challenging due to their complex microstructures. LÄS MER
23. Ultra high-pressure compaction of powder
Sammanfattning : Sintering at high-pressure improves the properties of the material, either through new sintering aids becoming available or through improving intergranular bonding. This gives the manufactured products potential advantages like faster cut rates, and more precise and cleaner production methods that add up to cost efficiency and competitive edge. LÄS MER
24. Modeling of fracture and damage in rubber under dynamic and quasi-static conditions
Sammanfattning : Elastomers are important engineering materials that have contributed to the different technical developments and applications since the 19th century. The study of crack growth mechanics for elastomers is of great importance to produce reliable products and therefore costly failures can be prevented. LÄS MER
25. On the fracture behaviour of softwood : a combined experimental and computational study of the interaction between fracture behaviour and material anatomy
Sammanfattning : The propensity for fracture, i.e. failure through separation of the material, is a factor that must be regarded in the design of wooden structures, but also in wood machining operations and drying. LÄS MER