Sökning: "Slag"
Visar resultat 1 - 5 av 453 avhandlingar innehållade ordet Slag.
1. Slag Cleaning of a Reduced Iron Silicate Slag by Settling : Influence of Process Parameters and Slag Modification on Copper Content
Sammanfattning : During the pyrometallurgical extraction of copper, a significant part of the copper is lost with discard slag, which decreases profits, overall copper recovery, and efficiency of raw material usage. Smelting furnace slag usually has a copper content that is close to or higher than that of copper ores. LÄS MER
2. A study of slag-steel-inclusion interaction during Ladle treatment
Sammanfattning : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. LÄS MER
3. A Study of Slag/Metal Equilibrium and Inclusion Characteristics during Ladle Treatment and after Ingot Casting
Sammanfattning : Today, there is a high demand on clean steel for high performance materialproperties. Thus, steel producers try to deliver a steel product with the highestquality and cleanliness to the market. The number of parameters that affect thesteel cleanliness may vary depending on the required material properties of thefinal product. LÄS MER
4. A study of solid and liquid inclusion separation at the steel-slag interface
Sammanfattning : This thesis work aimed to provide a better knowledge of inclusion behavior at the steel-slag interface. All results are based on mathematical modeling of liquid and solid inclusion separation to the slag. The model descriptions of the inclusion transfer are based on the equation of motion at the system. LÄS MER
5. A Mathematical and Experimental Study of Inclusion Behaviour at a Steel-Slag Interface
Sammanfattning : The aim of this thesis work is to increase the knowledge of inclusion behavior at the steel-slag interface by mathematical modeling and in-situ Confocal Scanning Laser Microscope experiments. Mathematical models based on the equation of motion predicting liquid and solid inclusion behavior was first investigated. LÄS MER