Sökning: "Sintering"
Visar resultat 6 - 10 av 247 avhandlingar innehållade ordet Sintering.
6. Sintering simulation framework for 316L stainless steel components manufactured by binder jetting
Sammanfattning : Binder Jetting (BJT) is an additive manufacturing (AM) technology allowing mass-production of small to medium-size metal components. BJT is a multi-step AM technology, where the geometrical shape of components is provided during the printing step, and the final properties are achieved through a second consolidation step - sintering. LÄS MER
7. Nanopowder as sintering aid for water-atomized ferrous powder
Sammanfattning : Press and sinter powder metallurgy steels are cost-effective solutions for structural applications. There is a constant drive for improvement in the density of these powder metallurgy steels to expand their usage in high-performance applications. LÄS MER
8. Experimental study and simulation of sintering of 316L components produced by binder jetting
Sammanfattning : Binder Jetting (BJT) is a multi-step Additive Manufacturing (AM) technique that is used for producing components with highly complex geometries and competitive final properties with high productivity when compared to other AM technologies. The first step provides the basic part geometric shape (BJT printing), and the next step (debinding and sintering) consolidates the part to reach final geometry and intended basic material properties. LÄS MER
9. Sintering in the Kraft Pulp Mill - Studies in the Rotary Kiln and Recovery Boiler
Sammanfattning : The conversion of black liquor to white liquor is carried out in the chemical recovery system, which is made up of several units; in two of them, i.e. the recovery boiler and the rotary kiln, sintering plays an important role. LÄS MER
10. Surface Characteristics of Water Atomized Pre-alloyed Steel Powders and their effect on Sintering
Sammanfattning : Powder Metallurgy (PM) is an efficient method, in terms of cost and raw material utilization, for the production of structural parts that have strict dimensional tolerances and complex geometries. In the common processing route, steel powder is fabricated by water atomization and then pressed and sintered into the final component. LÄS MER