Sökning: "Sintering parameters"
Visar resultat 1 - 5 av 57 avhandlingar innehållade orden Sintering parameters.
1. Surface Chemical Characteristics of Chromium-alloyed Steel Powder and the Role of Process Parameters during Sintering
Sammanfattning : Powder Metallurgy (PM) is a cost efficient method suitable for sustainable production of structural parts that have strict dimensional tolerances and complex geometries. It has been a common practice to utilize Ni and Cu as alloying elements in PM steels, but the high and fluctuating prices of Ni and the concerns around it associated with health hazards as well as the difficulty in recycling Cu lead the PM industry to search for effective alternatives such as Cr and Mn. LÄS MER
2. Experimental study and simulation of sintering of 316L components produced by binder jetting
Sammanfattning : Binder Jetting (BJT) is a multi-step Additive Manufacturing (AM) technique that is used for producing components with highly complex geometries and competitive final properties with high productivity when compared to other AM technologies. The first step provides the basic part geometric shape (BJT printing), and the next step (debinding and sintering) consolidates the part to reach final geometry and intended basic material properties. LÄS MER
3. Sintering of water-atomized iron and low-alloyed steel powder
Sammanfattning : Iron and steel powder grades are extensively used in the powder metallurgy (PM) industry for manufacturing of ferrous structural components, with a major customer in the automotive industry. The powder grades are predominantly manufactured by water-atomization, yielding powder particles with highly irregular morphology and good compressibility, making the powder ideal for the conventional press-and-sinter manufacturing route. LÄS MER
4. ROLE OF SURFACE OXIDES IN SINTERING OF CHROMIUM-ALLOYED STEEL POWDER
Sammanfattning : During water-atomisation and handling of steel powder the surface inevitably oxidises. The surface bound oxide is an important factor in the processing of powder metallurgical (PM) steels, especially in case the powder contains elements forming stable oxides, such as Cr, Mn, and Si. LÄS MER
5. Characteristics and Sintering of Fine Water-atomized and Carbonyl Iron Powder
Sammanfattning : Various types of iron powder are extensively used in the powder metallurgy (PM) industry. Water-atomized iron powder is commonly used as the base in many low-alloyed steel products manufactured through the conventional 'press and sinter' route, while carbonyl iron powder is often used for metal injection moulded (MIM) components. LÄS MER