Sökning: "Seismic processing"
Visar resultat 6 - 10 av 39 avhandlingar innehållade orden Seismic processing.
6. Reflection seismic studies in the Baltic shield : special processing techniques and results
Sammanfattning : .... LÄS MER
7. 2D and 3D Seismic Surveying at the CO2SINK Project Site, Ketzin, Germany: The Potential for Imaging the Shallow Subsurface
Sammanfattning : Seismic traveltime inversion, traveltime tomography and seismic reflection techniques have been applied for two dimensional (2D) and three dimensional (3D) data acquired in conjunction with site characterization and monitoring aspects at a carbon dioxide (CO2) geological storage site at Ketzin, Germany (the CO2SINK project). Conventional seismic methods that focused on investigating the CO2 storage and caprock formations showed a poor or no image of the upper 150 m. LÄS MER
8. Active and passive seismic methods for investigating the glacially-triggered Burträsk fault
Sammanfattning : Glacially-triggered faults are of high scientific interest since their formation was likely accompanied by major earthquakes and they are still a centre of seismicity in northern Fennoscandia, today. Imaging their deeper structure mainly relies on reflection seismics since the method generally has the best resolving power at depth of all geophysical methods. LÄS MER
9. Fast Radon Transforms and Reconstruction Techniques in Seismology
Sammanfattning : The measurements conducted in tomography and seismology typically yield large multidimensional data sets. This in combination with the fact that the data may have an irregular structure makes it computationally prohibitive to use simple reconstruction methods directly. LÄS MER
10. Direction of Arrival Estimation of Wideband Acoustic Wavefields in a Passive Sensing Environment
Sammanfattning : Direction Of Arrival (DOA) estimation has been an active research area for many decades because of its usefulness in many fields, such as wireless communication, navigation, astronomy, surveillance, medicine etc. In DOA estimation, emitted wavefields from unknown sources are measured with the aid of an array of sensors, and this information is then processed to determine various parameters of the sources including the angle between each source and the array. LÄS MER