Sökning: "SKPFM"

Visar resultat 1 - 5 av 10 avhandlingar innehållade ordet SKPFM.

  1. 1. Corrosion Behavior of Duplex Stainless Steels in Acidic-Chloride Solutions Studied with Micrometer Resolution

    Författare :Marc Femenia; KTH; []
    Nyckelord :In situ; local dissolution; STM; SKPFM; MFM; SAES; duplex stainless steel; acidic-chloride solution;

    Sammanfattning : The local corrosion behavior of duplex stainless steel (DSS)is affected by a wide variety of factors. Localized corrosionof DSS frequently starts at micrometer scale inclusions orprecipitates, which are often segregated in theaustenite-ferrite boundary regions. LÄS MER

  3. 2. Use of localised techniques to elucidate the influence of process variables on the corrosion of stainless steels

    Författare :Nuria Fuertes; Rachel Pettersson; Inger Odnevall; Stuart Lyon; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stainless steel; corrosion; passive film; thermal oxides; Volta potential; pickling; deformation; cold rolling; AM; SKPFM; SVET; Kemi; Chemistry;

    Sammanfattning : Several factors during steel manufacture and fabrication can alter the passivity and corrosion behaviour of stainless steels. These include alloying, deformation, welding and heat treatments. LÄS MER

  4. 3. Mechanistic studies of localized corrosion of Al alloys by high resolution in-situ and ex-situ probing techniques

    Författare :Ali Davoodi; Jinshan Pan; Gerald S. Frankel; KTH; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; localized corrosion; pitting; aluminum alloy; intermetallic particle; Volta potential; cathodic activity; micro-galvanic effect; size dependence; SKPFM; in-situ AFM; integrated AFM SECM; numerical simulation; micrometer resolution; EIS.; Chemistry; Kemi;

    Sammanfattning : A multi-analytical approach based on in-situ and ex-situ local probing techniques was employed to investigate localized corrosion mechanisms of some aluminum alloys in chloride containing solutions, focusing on the influence of intermetallic particles (IMPs) in the alloys. In the EN AW-3003 alloy, SEM-EDS analysis revealed constituent and dispersoid IMPs. LÄS MER

  5. 4. Use of local electrochemical techniques for corrosion studies of stainless steels

    Författare :Nuria Fuertes; Rachel Pettersson; Mari Sparr; Ulf Kivisäkk; Yolanda Hedberg; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stainless steel; passive film; thermal oxides; work function; pickling; SKPFM; SVET; XPS; AES; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : The excellent corrosion resistance of stainless steels arises from the presence of a passive film on its surface. Above 10.5wt% Cr a chromium oxide of 1-3 nm is formed on the surface of the metal that in case of damage will reform and hinder further dissolution of the metal. LÄS MER

  7. 5. An Insight into the Critical Role of Microstructure and Surface Preparation on Localized Conversion Coating Deposition on Cast Al Alloys

    Författare :Salil Sainis; Caterina Zanella; Ehsan Ghassemali; Marjorie Olivier; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; aluminium alloys; cast Al-Si alloys; conversion coating treatment; cerium; localized deposition; surface preparation; microstructure; SEM; FIB-SEM; AFM-SKPFM; Aluminiumlegeringar; gjutna Al-Si legeringar; Cerium; lokal deposition; omvandlingsbeläggningsbehandling; förbehandling av yta; mikrostruktur; SEM; FIB-SEM; AFM-SKPFM;

    Sammanfattning : The spontaneous cerium conversion coating formation over aluminium alloys is affected by the chemical process conditions, the surface preparation prior to conversion treatment and the microstructure of the underlying alloy. Most research performed until now focus only on the former whereas the influence of the latter two is poorly understood. LÄS MER