Sökning: "Robert Eriksson"

Visar resultat 21 - 25 av 36 avhandlingar innehållade orden Robert Eriksson.

1. 21. Failure mechanisms in APS and SPS thermal barrier coatings during cyclic oxidation and hot corrosion

   Författare :Krisha Praveen Jonnalagadda; Ru Lin Peng; Xin-Hai Li; Robert Eriksson; Shrikant Joshi; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : Thermal Barrier Coatings (TBCs) are advanced material systems that are being used in the hot sections of gas turbines such as combustor, turbine blades, and vanes. The top ceramic coating in TBCs provides insulation against the hot gases and the intermediate metallic bond coat provides oxidation and corrosion resistance to the underlying turbine components. LÄS MER

3. 22. Thermal Barrier Coatings : Failure Mechanisms and Life Prediction

   Författare :Krishna Praveen Jonnalagadda; Ru Lin Peng; Xin-Hai Li; Robert Eriksson; Nicholls John; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : Thermal barrier coatings (TBCs) use in the hot sections of gas turbine engine enables them to run at higher temperatures, and as a consequence, achieve higher thermal efficiency. For full operational exploitation of TBCs, understanding their failure and knowing the service life is essential. LÄS MER

4. 23. Fatigue life prediction of additively manufactured ductile nickel-based superalloys : Constitutive and crack initiation modelling

   Författare :Thomas Lindström; Daniel Leidermark; Kjell Simonsson; Robert Eriksson; Magnus Ekh; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Low-cycle fatigue; Thermomechanical fatigue; Constitutive modelling; Anisotropy;

   Sammanfattning : This dissertation was produced at the Division of Solid Mechanics at Linköping University, and is the final result of a project that included mechanical testing and modelling of an additively manufactured ductile nickel-based superalloy.The main objective of the work presented in this thesis was to investigate and model the cyclic behaviour and the fatigue life behaviour of an additively manufactured ductile nickel-based superalloy, with emphasis on modelling the stabilised material behaviour, by which fatigue life predictions can be based upon. LÄS MER

5. 24. Modelling of TMF Crack Growth in Polycrystalline Gas Turbine Alloys : Accounting for Crack Closure Effects

   Författare :Jordi Loureiro-Homs; Kjell Simonsson; Robert Eriksson; Daniel Leidermark; Tomas Månsson; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : The main objective of the work presented in this Licentiate of Engineering thesis is to investigate and model the fatigue crack propagation behaviour of the nickel-based superalloy Inconel 792, with special attention to the industrial lifing of high-temperature components. In-phase (IP) crack propagation tests have been performed at different temperatures and loading regimes, including extended hold times. LÄS MER

7. 25. Influence of Stirring on the Inclusion Characteristics during Vacuum Degassing in a Ladle

   Författare :Charlotte Médioni; Pär Jönsson; Robert Eriksson; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vacuum degassing treatment; inclusions; ladle eye; stirring intensity; denitrogenization; desulphurization.;

   Sammanfattning : Steel cleanliness as a function of stirring practice during vacuum degassing treatment have been investigated in industrial studies at the steel plants of SSAB Special Steels in Oxelösund and Uddeholm AB in Hagfors. The cleanliness was examined with regards to the contents of sulphur, nitrogen and large inclusions (>10µm). LÄS MER