Sökning: "Residual oxides"
Visar resultat 1 - 5 av 29 avhandlingar innehållade orden Residual oxides.
1. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties
Sammanfattning : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. LÄS MER
2. Key Aspects of Sintering Powder Metallurgy Steel Prealloyed with Chromium and Manganese
Sammanfattning : The powder metallurgy (PM) process is a cost efficient near net-shape technology suitable for sustainable manufacturing of structural steel components. A drawback with the PM technology is the difficulty to use oxidation sensitive alloying elements, such as Cr and Mn. LÄS MER
3. Laser-based powder bed fusion of stainless steels
Sammanfattning : The aim of the present work has been to widen the knowledge of how variations within powder manufacturing affect laser-based powder bed fusion processing, and how this processing affects the microstructure and strength of stainless steels. The approach was to keep the processing parameters fixed while the powder feedstock was varied. LÄS MER
4. Tailored process gases for laser powder bed fusion
Sammanfattning : Metal laser powder bed fusion (L-PBF) allows for production of complex components using the energy from a laser to locally melt micron-sized powder following a layer-wise approach. Considerable scientific efforts are focused on addressing the influence of the process parameters on the melting stability and the control of material properties, while developing necessary monitoring and characterization tools. LÄS MER
5. Electrochromism in Nickel-based Oxides : Coloration Mechanisms and Optimization of Sputter-deposited Thin Films
Sammanfattning : Electrochromic properties of sputter-deposited nickel-based oxide films have been studied with a two-fold goal. From a practical point of view, the optical switching performance has been improved by optimizing the deposition conditions and film stoichiometry with respect to oxygen and hydrogen, and further by adding Mg, Al, Si, Zr, Nb or Ta to the films. LÄS MER