Sökning: "Rapid solidification"

Visar resultat 6 - 10 av 19 avhandlingar innehållade orden Rapid solidification.

1. 6. Microstructural development in laser-based powder bed fusion - from ferritic stainless steel to medium entropy alloys

   Författare :Sri Bala Aditya Malladi; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; mechanical properties; interstitial solid solution strengthening; ferritic stainless steels; inoculation; Laser-based powder bed fusion; microstructural characterization; medium entropy alloys;

   Sammanfattning : Ever since the advent of additive manufacturing (AM), the interest in AM technologies has skyrocketed due to its intrinsic ability to produce near net shaped components. Laser-based powder bed fusion (LB-PBF), being one of the most widely adapted AM technologies, has been especially a game changer due to its ability to produce components of complex geometries with improved designs and to reduce not only the final weight of the products but also the amount of the waste produced. LÄS MER

3. 7. Characteristics of cast magnesium alloys : microstructures, defects and mechanical properties

   Författare :Haiping Cao; Anders Jarfors; Linköpings universitet; []
   Nyckelord :Mg alloys; microstructure; mechanical properties; defects; modelling; segregation bands; hot tear; mould constraint; semi-solid casting.; TECHNOLOGY; TEKNIKVETENSKAP;

   Sammanfattning : Magnesium is the lightest of all structural metals. As such, and combined  with good mechanical and physical properties, it forms the basis for commercial alloys that have found successful use in a wide variety of applications. LÄS MER

4. 8. An Experimental Study of a Liquid Steel Sampling Process

   Författare :Ola Ericsson; Andrey Karasev; Pär Jönsson; Lauri Holappa; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; liquid steel sampling; inclusion characteristics; sampling conditions; sample homogeneity.; Metallurgical process engineering; Metallurgisk processteknik;

   Sammanfattning : During the steelmaking process samples are taken from the liquid steel, mainly to assess the chemical composition of the steel. Recently, methods for rapid determination of inclusion characteristics (size and composition) have progressed to the level where they can be implemented in process control. LÄS MER

5. 9. Modelling of Bulk Metallic Glass formation in Powder Bed Fusion

   Författare :Johan Lindwall; Andreas Lundbäck; Mattias Unosson; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

   Sammanfattning : This thesis discusses a model for simulation of the Powder Bed Fusion (PBF) process of metallic powder with the capability to become amorphous. The temperature field in the PBF process is predicted by a three-dimensional thermal finite element model in three dimensions using a layer-by-layer approach, meaning that the scanning strategy of the moving laser spot is consolidated into a single heat source acting on the entire layer momentarily. LÄS MER

7. 10. Crystallization in additive manufacturing of metallic glass

   Författare :Anders Ericsson; Hållfasthetslära; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Amorphous metals; Crystallization; Laser powder bed fusion; Neutron scattering; Phase-field theory; Classical nucleation theory;

   Sammanfattning : Metallic glasses are non-crystalline metals that are obtained by rapid cooling of the melt to bypass crystallization. The amorphous atomic structure shows enhanced properties relative to the crystalline counterpart. For example, enhanced mechanical properties, improved corrosion resistance, as well as excellent soft magnetic properties. LÄS MER