Sökning: "Plastic Mould Steels"
Hittade 5 avhandlingar innehållade orden Plastic Mould Steels.
1. Polishability of tool steels : Characterisation of high gloss polished tool steels
Sammanfattning : The manufacturing of plastic components, like a majority of other mass produced discrete parts, require well designed dies and moulds. Complex geometries and increasing demands on final surface appearance, which is strongly connected to the quality impression, are pushing for high demands on mould-makers and polishers as well as steel producers. LÄS MER
2. The Metallurgical Aspects of Machinability in Prehardened Mould Steels
Sammanfattning : High economical efficiency obtained by utilizing prehardened mould steels in plastic mould making has increased the usage of these types of steels to a great extent. Generally, prehardened mould steels are applied for large moulds and moulds for moderate production runs, and one of the advantages of using this type of steel is that no heat treatment is necessary for putting the mould in use. LÄS MER
3. Influence of Microstructure on the Machinability of Prehardened Mould Steels
Sammanfattning : Mould steels are mainly employed in moulding of plastic products, and also some metals withlow melting temperature such as magnesium alloys. The ever-growing usage of plastics in theindustry, especially the automotive industry, and in everyday life, has increased the utilizationof mould steels. LÄS MER
4. On Polishability of Tool Steels
Sammanfattning : One of the world’s fastest growing industries is the plastic industry. Today’s ever increasing demands of high quality products, shorter lead times and reduced costs push development and research forwards. LÄS MER
5. On Peritectic Reactions and Transformations and Hot Forming of Cast Structures
Sammanfattning : This thesis deals with peritectic reactions and transformations that occur during the solidification of many alloys. Peritectics are believed to be a major cause of crack-formation in many steels, thus, good knowledge of the mechanisms by which these phenomena occur is essential for preventing such defects. LÄS MER