Sökning: "Peng Yu"

Hittade 3 avhandlingar innehållade orden Peng Yu.

  1. 1. Modelling and Simulation of Reactor Pressure Vessel Failure during Severe Accidents

    Författare :Peng Yu; Weimin Ma; Walter Villanueva; Sevostian Bechta; Florian Fichot; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; RPV failure; thermo-fluid-structure coupling; creep modelling; melt pool heat transfer; severe accident; CFD; FEA; transIVR;

    Sammanfattning : This thesis aims at the development of new coupling approaches and new models for the thermo-fluid-structure coupling problem of reactor pressure vessel (RPV) failure during severe accidents and related physical phenomena. The thesis work consists of five parts: (i) development of a three-stage creep model for RPV steel 16MND5, (ii) development of a thermo-fluid-structure coupling approach for RPV failure analysis, (iii) performance comparison of the new approach that uses volume loads mapping (VLM) for data transfer with the previous approach that uses surface loads mapping (SLM), (iv) development of a lumped-parameter code for quick estimate of transient melt pool heat transfer, and (v) development of a hybrid coupling approach for efficient analysis of RPV failure. LÄS MER

  3. 2. Anisotropic mechanical behaviors and microstructural evolution of thin-walled additively manufactured metals

    Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Joe Kelleher; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; hot tensile testing; slow strain rate tensile testing; creep; anisotropy; crystallographic texture evolution; deformation twinning; Varmdragprov; Dragprov med låg töjningshastighet; kryp; anisotropi; kristallografisk textur; deformationstvillingar;

    Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a concept and method of a manufacturing process that builds a three-dimensional object layer-by-layer. Opposite to the conventional subtractive manufacturing, it conquers various limitations on component design freedom and raises interest in various fields, including aerospace, automotive and medical applications. LÄS MER

  4. 3. Anisotropic Mechanical Behaviours and Thin-wall Effects of Additively Manufactured Austenitic Alloys

    Författare :Cheng-Han Yu; Johan Moverare; Ru Lin Peng; Christian Leinenbach; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser powder bed fusion; Slow strain rate tensile testing; Short-term creep; Low cycle fatigue; Neutrons; Anisotropy; Crystallographic texture; Microstruc-ture; Dislocation structure; Lasersmältning i pulverbädd; Provning med långsam töjningshastighet; korttidskryp; Lågcykelutmattning; Neutroner; Anisotropi; Kristallografisk textur; Mikrostruktur; Dislokationsstruktur;

    Sammanfattning : Additive manufacturing (AM), also known as 3D printing, is a general concept of building a three-dimensional object layer-by-layer. AM breaks through the manufacturing limitations in conventionally subtractive manufacturing, leading to a great design freedom of components with complex geometries. LÄS MER