Sökning: "Penetration rate"
Visar resultat 1 - 5 av 127 avhandlingar innehållade orden Penetration rate.
1. Liquid phase sintering of W-Ni-Fe composites : liquid penetration, agglomerate separation and tungsten particle growth
Sammanfattning : The initial stage of liquid phase sintering, involving liquid penetration, agglomerate separation, particle spreading and growth has been investigated in experiments using tungsten heavy alloys. The particle composites used were produced by hot isostatic pressing (HIP) of pure powder mixtures of W-Ni-Fe-(Co). LÄS MER
2. Concrete Structures Subjected to Fragment Impacts
Sammanfattning : As concrete is commonly used for protective structures, how a blast wave and fragment impacts from an explosion affect the concrete is an important issue. Concrete subjected to explosive loading responds very differently from statically loaded structures. LÄS MER
3. A physical modeling study of top blowing with focus on the penetration region
Sammanfattning : This thesis work aimed at increasing the knowledge regarding phenomena occurring when gas is injected using a top-blown lance on to a bath. All results are based on physical modeling studies carried out both using low and high gas flow rates and nozzle diameters ranging from 0.8 mm to 3.0 mm. LÄS MER
4. On the hot crack formation during solidification of iron-base alloys
Sammanfattning : Hot cracking during solidification is a severe problem inmany casting processes, for example in continuous casting.Combinations of low strength and low ductility of the materialat high temperatures and applied tensile stress can cause hotcracking. LÄS MER
5. Wetting and Capillary Flow of Surfactant Solutions and Inks
Sammanfattning : This thesis presents results of a series of experimental studies on the spreading dynamics of small drops of complex solutions on solid surfaces. The capillary flow dynamics of complex solutions have also been investigated. LÄS MER