Sökning: "Partial discharges PDs"
Visar resultat 1 - 5 av 10 avhandlingar innehållade orden Partial discharges PDs.
1. Partial Discharges at Repetitive Rapidly Changing Voltages
Sammanfattning : Electrical insulation can today be exposed to voltages having considerably higherfrequency components than the conventional power frequency AC 50 Hz or 60 Hz,for example due to the increased use of power electronics in power systems. Thishas in a number of cases caused unexpected behaviour, including failures. LÄS MER
2. Partial Discharges at Fast Rising Voltages
Sammanfattning : The present demand for higher efficiency and flexibility in the energy sector has led to an increased use of power electronic generated waveforms as these allow energy conversion between different frequencies including DC. The generated waveforms are usually synthesized by so called Pulse Width Modulation (PWM) techniques, where the desired waveform is approximated by a number of square shaped pulses with a short rise time. LÄS MER
3. Measurement and Analysis of Partial Discharges at Semi-Square Voltages
Sammanfattning : Insulation is today being exposed to voltages having considerably higher frequency components than the conventional power frequency AC 50 Hz or 60 Hz, for example in motors supplied by adjustable speed drives based on pulse width modulated converters. This has in many cases caused unexpected behaviour of the insulation systems. LÄS MER
4. Detection of Partial Discharges at Fast Rising Voltages
Sammanfattning : The present demand for higher efficiency and flexibility in the energy sector has ledto an increased use of power electronic generated waveforms as these allow energyconversion between different frequencies including DC. The generated waveformsare usually synthesized by so called Pulse Width Modulation (PWM) techniques,where the desired waveform is approximated by a number of square shaped pulseswith a short rise time. LÄS MER
5. Partial discharges studied by dielectric response method
Sammanfattning : The increasing demand of integrating various renewable energy recourses in power system requires extensive use of power electronic solutions, which allows energy conversion between different frequencies and stabilizes the system. Consequently, other than the traditional 50/60 Hz sinusoidal voltage stresses act on the high voltage insulation systems. LÄS MER